Loading...
Thumbnail Image

Govind Ballabh Pant University of Agriculture and Technology, Pantnagar

After independence, development of the rural sector was considered the primary concern of the Government of India. In 1949, with the appointment of the Radhakrishnan University Education Commission, imparting of agricultural education through the setting up of rural universities became the focal point. Later, in 1954 an Indo-American team led by Dr. K.R. Damle, the Vice-President of ICAR, was constituted that arrived at the idea of establishing a Rural University on the land-grant pattern of USA. As a consequence a contract between the Government of India, the Technical Cooperation Mission and some land-grant universities of USA, was signed to promote agricultural education in the country. The US universities included the universities of Tennessee, the Ohio State University, the Kansas State University, The University of Illinois, the Pennsylvania State University and the University of Missouri. The task of assisting Uttar Pradesh in establishing an agricultural university was assigned to the University of Illinois which signed a contract in 1959 to establish an agricultural University in the State. Dean, H.W. Hannah, of the University of Illinois prepared a blueprint for a Rural University to be set up at the Tarai State Farm in the district Nainital, UP. In the initial stage the University of Illinois also offered the services of its scientists and teachers. Thus, in 1960, the first agricultural university of India, UP Agricultural University, came into being by an Act of legislation, UP Act XI-V of 1958. The Act was later amended under UP Universities Re-enactment and Amendment Act 1972 and the University was rechristened as Govind Ballabh Pant University of Agriculture and Technology keeping in view the contributions of Pt. Govind Ballabh Pant, the then Chief Minister of UP. The University was dedicated to the Nation by the first Prime Minister of India Pt Jawaharlal Nehru on 17 November 1960. The G.B. Pant University is a symbol of successful partnership between India and the United States. The establishment of this university brought about a revolution in agricultural education, research and extension. It paved the way for setting up of 31 other agricultural universities in the country.

Browse

Search Results

Now showing 1 - 9 of 44
  • ThesisItemOpen Access
    Implementation of 2-x function using polynomial approximation
    (G. B. Pant University of Agriculture and Technology, Pantnagar, 2022-10) Khan, Sameena; Tomar, Abhishek
    The primary building block of arithmetic circuits is the implementation of elementary functions. Commonly utilised building blocks in sophisticated algorithms include elementary functions like logarithms, exponentials, trigonometric functions, square roots, and inverse square roots. With a limited amount of arithmetic operations, it is impossible to compute elementary functions precisely, only an approximation of these functions is obtainable. The aim of the proposed work is to implement one of the elementary functions i.e., ‘2-X’ which is a frequently used function in digital signal processing, machine learning, artificial intelligence and is frequently utilised in a variety of scientific application. So, we proposed to design an architecture of a polynomial approximation based 2-X function using polynomial approximation. This architecture is implemented with hybrid method and curve fitting techniques with linear and quadratic polynomial approximation method. Further, in the proposed architecture number of segments are increased to reduce error characteristics and to improve accuracy. The designed architecture is simulated using Verilog Xilinx ISE Design Suite software with Isim simulator and MATLAB simulation tools. The results show that both the architecture design methods provide the flexibility that one may choose either the linear approximation for shorter latency or the quadratic approximation for relative high accuracy result. The maximum error of proposed architecture is reduced in comparision to the previously described architecture. So, proposed architecture has better accuracy than previous architecture at the cost of small increase in memory.
  • ThesisItemOpen Access
    Design and analysis of metamaterial based patch antenna with low SAR for healthcare applications
    (G. B. Pant University of Agriculture and Technology, Pantnagar, 2022-10) Rawat, Himani; Paras
    A new metamaterial-based UWB antenna with a frequency range of 2–12 GHz is described. This antenna employs metamaterial with a low specific absorption rate. Wearable antennas are becoming more and more necessary, exclusively in the field of healthcare. The antenna is positioned in free space for the analysis and then close to the human body. The antenna's parameters are then measured, simulated, and compared. The designed antenna involves the use of an Fr4 substrate with a 1.3 mm thickness and dimension of 30 mm*30 mm. The curves are added along with slotting on the ground and patch. Metamaterial SRR is used to enhance the overall bandwidth of the antenna and reduces the SAR rate. The antenna shows better results for off and on the body when placed on the human body. It is observed that there is a reduction in gain and radiation efficiency when the antenna is placed near the human body. The proposed antenna is simulated using Ansoft HFSS software, fabricated in a PCB designing machine, and tested using VNA. The proposed antenna resonates in UWB frequency bands with a bandwidth of 9 GHz having a gain above 5 dB and efficiency above 90%. The measured return is in good agreement with the simulated one. The performance of the proposed antenna is far better than earlier reported work. It can be determined from the results that the antenna will work efficiently for healthcare applications with low SAR.
  • ThesisItemOpen Access
    Design of a microstrip antenna for early brain stroke detection
    (G.B. Pant University of Agriculture and Technology, Pantnagar, District Udham Singh Nagar, Uttarakhand. PIN - 263145, 2022-10) Singh, Sanjul; Verma, Reeta
    Stroke is one of the world's most serious health issue. A decrease of blood flow to a portion of the brain that results in brain tissue damage is termed as stroke in medical science. Blood clots and ruptured blood arteries in the brain are the main causes of strokes Depending on which portion of the brain is injured and how long the brain is deprived of blood flow, a stroke may result in either temporary or permanent disability A brain stroke can be categorized under ischemic stroke and hemorrhagic stroke. Magnetic Resonance Imaging (MRI), Biopsy Test, Computerized Tomography (CT) scan, Positron Emission Tomography (PET) scan, Electro Encephalogram (EEG), and other tests are available for early diagnosis of brain stroke. Existing approaches are noninvasive, but they are constrained by cost and reliability concerns. These diagnostic approaches are insufficient to detect stroke in human head. In the dissertation, a microstrip slot antenna has been designed with stroke model and human head phantom model, and stroke is detected with the help of antenna. In the ISM band frequency range proposed antenna with circular edge slots and circular slot in slot in the front plane and ground slotted plane has been designed. A 3-D seven layer simulated head phantom model is designed and interfaced with the proposed antenna with and without stroke model. The seven layer head phantom model consists of skin, fat, muscle, skull, dura cerebro spinal fluid and brain layers with different thickness, permittivity and conuctivity. The stroke is detected by observing changes in antenna performance parameters viz. return loss, peak gain, radiation efficiency. Sphere shaped stroke is detected by observing variation in the antenna performance parameter. The stroke detection is applied on the cylindrical phantom on the HFSS software. The result shows that the change in performance is experienced as the distance between the antenna and the head phantom is changed. The value of peak gain and radiation efficiency decreases thus depicting the presence of stroke.
  • ThesisItemOpen Access
    Design and analysis of wearable AMC backed antenna on FR4 substrate for WBAN application
    (G.B. Pant University of Agriculture and Technology, Pantnagar - 263145 (Uttarakhand), 2022-02) Kavita; Paras
    Wireless body area network contains sensors and actuators which work in the proximity of human body .For this purpose an antenna is needed which can work near the human body without any significant change in the bandwidth, gain and radiation efficiency of the antenna. This is a challenging task since it is observed that an antenna working near the human body faces shifts in the bandwidth, reduction in gain and radiation efficiency of the antenna. This is due to the fact that human body is lossy in nature and therefore most of the radiation is absorbed by the body resulting in very little gain and radiation efficiency. A rectangular patch antenna is designed on FR4 substrate and its characteristic is observed. To increase the bandwidth of the antenna the current path is changed by making proper slots on the antenna patch as well as ground plane. The characteristic of the antenna is observed for on body and free space conditions. When the antenna is loaded on human body a significant reduction in the radiation efficiency is observed. To mitigate this problem, an artificial magnetic conductor is used with the antenna. Antenna shows very good bandwidth for both on body and free space condition. With the AMC structure, the bandwidth of the antenna further increases. Also the radiation efficiency of the antenna with the AMC structure is good with very small back lobe radiation for both free space and on body condition. This shows the antenna is a good candidate for wearable application and WBAN.
  • ThesisItemOpen Access
    A compact defected-ground UWB antenna for breast tumor detection using SAR analysis
    (G.B. Pant University of Agriculture and Technology, Pantnagar - 263145 (Uttarakhand), 2022-02) Kandpal, Rekha; Paras
    Tumor is the world's most serious health issue. There are various methods for detecting a tumor in any region of the human body. Breast cancer is one of the most frequent cancers worldwide. Tumor generated by improper tissue growth. It is classified based on its size and location within the body. Magnetic Resonance Imaging (MRI), Biopsy Test, Computerized Tomography (CT) scan, Positron Emission Tomography (PET) scan, mammography, Electro Encephalogram (EEG), and other tests are available for early diagnosis of breast tumors. Existing approaches are noninvasive, but they are constrained by cost and reliability concerns. These diagnostic approaches are insufficient to detect tumors that are deeper than 20% and cause major problems. In the dissertation, an ultra wideband antenna has designed with variable size (i.e. radius) of the tumor and breast phantom models, and the tumor is detected with the help of antenna. An ultra wide band planer antenna with T-shape slot in the front plane and the modified defected ground plane has been designed. A 3-D three layer simulated breast phantom model with radius 30mm is designed and interfaced with the proposed antenna with and without tumor. The three layer breast phantom model consists of skin, fat and fiber layer. The tumor is detected by observing changes in antenna performance parameters viz. electric field distribution, return loss, current density, SAR (specific absorption rate). Sphere shaped tumor is detected by observing variation in the antenna performance parameter. The tumor detection is applied on the semi-hemispherical breast phantom on the HFSS software. The result shows that the change in the radius of tumor, location of tumor and the position of the UWB antenna changes the antenna performance parameters because of the electrical properties of tumor and breast phantom. The value of SAR decreases on increasing the distance between the antenna and phantom as well as increases on increasing the radius of the tumor. The current density, electric field and magnetic field distribution also decreases on moving the tumor tissue deep inside the cell. Thus, SAR is best choice for detection of the malignant tissue inside the phantom and the antenna therefore be used in bio-medical applications.
  • ThesisItemOpen Access
    Real-time detection of Salmonella Typhimurium using optical fiber plasmonic biosensor based on surface plasmon resonance
    (G.B. Pant University of Agriculture and Technology, Pantnagar - 263145 (Uttarakhand), 2021-08) Joshi, Abhishek; Mathur, Sanjay
    Foodborne pathogens have remarkably caused food contamination at every stage of food production, processing, and distribution. Salmonella is one of the main organisms causing the outbreaks of foodborne illnesses, and pork is one of the major vehicles of foodborne salmonellosis throughout the world. It is therefore highly desirable that the presence of Salmonella Typhimurium be detected at the preprocessing stage of the product been made from any such source which may carry this bacteria and that may contaminate the product. In this thesis an optical fiber index sensor based on surface plasmon resonance is proposed for label-free and real-time detection of Salmonella Typhimurium. The sensing properties of the sensor are numerically simulated in COMSOL Multiphysics5.5. The first layer of silver nanoparticles is coated on the fiber probe sensor and the second layer as grapheme oxide. The reflection properties and the refractive index sensitivity of the sensor are systemically investigated. The results shows that by changing refractive index on the surface of multimode optical fiber gives a remarkable shift of resonance peak. In addition the proposed sensor is very easy to make and the layer of graphene oxide enhances the field to a great extent and also protect the silver film from oxidation. This refractive index sensor is highly sensitive and best choice for bio-medical applications.
  • ThesisItemOpen Access
    Development of adaptive sorting algorithm using tag array and multi core processing
    (G.B. Pant University of Agriculture and Technology, Pantnagar - 263145 (Uttarakhand), 2021-01) Saini, Chakshu; Tomar, Abhishek
    Data sorting is the pivotal part to the management of the data because it is the mostly used data structure in today’s world. And for the sorting purpose we have many algorithms with their pros and cons. One of the biggest challenge is the time complexity of these sorting algorithms. So, we have used divide and conquer principle using tag array and multi-processing to utilize the system potential fully. Proposed sorting algorithm gives the better results than the existing array sort algorithm in terms of time complexity in the worst case and in average case.
  • ThesisItemOpen Access
    Design & performance analysis of trigate junctionless 22nm TFET
    (G.B. Pant University of Agriculture and Technology, Pantnagar - 263145 (Uttarakhand), 2020-12) Rajput, Poshita; Tomar, Abhishek
    Nowadays, Nano scale devices are in demand due to their higher packing density and high performance in microelectronics circuits. These nano-scale devices, suffer with short channel effects including DIBL, Sub-threshold slope, small Ion/Ioff ratio, large leakage current etc. To overcome these short channel effects, we have proposed a 22 nm Dual Material Gate Tri-gate Junctionless FinFET. The gate of this device is made up of two material Tungston and Silver, with work function of 5.2 eV and 4.74 eV, respectively. The proposed DM DG JL FinFET is simulated using software Visual TCAD. The Effect of Dual Material Gate work function Difference on Electrical Characteristics like ION/IOFF, Subthreshold slope, DIBL is simulated. The simulation results of proposed device show subthreshold slope of 62.64mV/dec – 68.19mV/dec, ION/IOFF ratio of 5.49E+07- 3.898E9 and DIBL 18.6 mV/V-60.02mV/dec for a workfiunction deiffenece from 0.0eVto 0.8eV. The proposed devices due to three side gates have better control on charge carriers in the channel. Further, two metal gate improves carrier transport efficiency, reduce short channel effects in term of DIBL, Subthreshold slope and improves ION/IOFF ratio. The reduction achieved is 5% - 23% in subthreshold slope and 67% - 85% in DIBL. The proposed device has low leakage current and is very useful for memory circuits.
  • ThesisItemOpen Access
    Performance evaluation of 22nm and 14nm TG-FinFET using parametric analysis
    (G.B. Pant University of Agriculture and Technology, Pantnagar - 263145 (Uttarakhand), 2020-11) Tewari, Kanika; Sharma, K.K.
    Relentless scaling of planar MOSFETs over the past four decades has delivered ever increasing transistor density and performance to the Integrated Circuits (ICs). The continuing trend of scaling of planar MOSFET in nanometer regime has become challenging as it brought several detrimental effects such as increased leakage current and short channel effects (SCEs). Hence, to face these formidable challenges in nanometer regime FinFET has emerged as the best successors. In this proposed work, a study of various process parameter variations on the operation of Multigate transistor has been done. For this, Tri-gate FinFET (TG-FinFET) structure of 22nm and 14nm device has been designed by using TCAD tool. The parameters such as fin height, fin width, channel doping, oxide thickness and underlap length has been varied for both low-k dielectric material and high-k dielectric material and the device performance has been observed. The simulation results with high-k dielectric and low-k dielectric were observed. It showed that with the increase in doping concentration and decrease in fin height and width the performance of device improved and the short channel effects reduced. Replacing low-k dielectric with high-k dielectric material results in improvement in device performance.