Loading...
Thumbnail Image

Thesis

Browse

Search Results

Now showing 1 - 9 of 12
  • ThesisItemRestricted
    Synthesis and fungicidal activity of 2-aminopyrimidine schiff bases
    (Punjab Agricultural University, Ludhiana, 2021) Amanpreet Kaur; Sharma, Sunita
    2-Aminopyrimidines represent an important class of bioactive molecules where its structural changes would lead to its versatile properties. N-Heterocyclic compound i.e. 2aminopyrimidine had wide range of applications in medicinal, material chemistry and agriculture as antifungal, antimicrobial and antibacterial agents. In the present study, a series of substituted N-benzylidine-2-aminopyrimidine compounds were synthesized by condensation reaction of 2-aminopyrimidine with substituted benzaldehydes (o-chloro, mhydroxybenzaldehyde, p-hydroxybenzaldehyde, 2,5-dimethoxybenzaldehyde, pdimethylaminobenzaldehye, syringaldehyde, o-phthaldehyde, isovanillin benzaldehyde, veratraldehyde and thiophene-2-carboxyaldehyde). The synthesised Schiff bases were characterized using UV, IR, 1H NMR and 13C spectral studies. The antifungal activity of all the synthesized Schiff bases was screened against Fusarium verticillioides, Macrophomina phaseolina, and Rhizoctonia solani using poisoned food technique. The Schiff base of pdimethylaminobenzaldehyde and 2-aminopyrimidine showed hundred percent inhibition against all the three fungi but less than carbendazim at 50 WP as its ED50 was less than all the synthesized Schiff bases. Thus, in future, this kind of pyrimidine derivatives may be used to generate better fungicides with improved fungicidal activities.
  • ThesisItemOpen Access
    Electron-acoustic waves in quantum plasma with κdeformed Kaniadakis hot electrons
    (Punjab Agricultural University, Ludhiana, 2020) Amanpreet Kaur; Parveen Bala
    The propagation properties of electron acoustic waves (EAWs) are studied in the quantum plasma system containing inertialess hot electrons, inertial cold electrons and stationary ions which forms the charge neutralizing background for understanding the properties of solitary wave structures. It is assumed that hot electrons follow κ-deformed Kaniadakis distribution, governed by parameter κ. The dispersion relation is obtained using the linearization method. Using the appropriate stretched coordinates and reductive perturbation method (RPM) the Korteweg-de Vries (KdV) and modified KdV (mKdV) equation has been derived. For the analysis, a limit of range of deformation parameter (κ) has been set as -0.4≤κ ≤0.4. For the defined range, it has been observed that plasma system supports rarefactive solitary structures. The amplitude and width of KdV soliton have been significantly affected by quantum parameter (H), whereas amplitude and width of solitary wave remains unaffected by deformation parameter (κ). The analysis was further extended to explain double layers solution in such plasma system. It is found that rarefactive double layers significantly depend on deformation parameter (κ), quantum parameter (H) and hot to cold electron density ratio (α). The presented investigation may be helpful to understand the study of nonlinear waves in the astrophysical plasmas.
  • ThesisItemOpen Access
    Enhancing carbohydrate and starch accumulation in microalgae for bioethanol production
    (Punjab Agricultural University, Ludhiana, 2019) Amanpreet Kaur; Taggar, Monica Sachdeva
    The present study was carried out to optimize the culture conditions for enhancing carbohydrate and starch accumulation in Chlorella sorokiniana for the bioethanol production. The growth and biomass of microalgae was studied with the sparging of carbon dioxide into the culture medium. The mean growth (0.70), fresh biomass (7983.33 mg l-1), dry biomass (1516.67 mg l-1) and biomass productivity (163.33 mg l-1 day-1) of microalgae was higher with the sparging of carbon dioxide into the culture medium. The effect of different concentrations of potassium nitrate, i.e. 4, 2 and 1 g l-1 in the culture medium revealed high growth (0.98), fresh (8053.33 mg l-1) and dry biomass (1556.67 mg l-1) of microalgae at 4 g l-1 potassium nitrate in the culture medium. The maximum accumulation of total carbohydrate (50.28%) and starch (34.06%) in the microalgae was observed at 1 g l-1 potassium nitrate concentration in the culture medium at 2 days after culturing (DAC) while the total soluble protein content (18.24%) was observed to be maximum at 4 g l-1 potassium nitrate concentration in the culture medium at 8 DAC. The maximum chlorophyll a, b and total chlorophyll content of 403.22 μg g-1 fw, 346.66 μg g-1 fw and 749.88 μg g-1 fw of microalgae was observed at 4 g l-1 potassium nitrate level in the culture medium, respectively. Morphological characterization of C. sorokiniana revealed dense starch granules in the cells under nitrogen limiting conditions. Chitosan, at a concentration of 200 ppm, showed maximum flocculation (90.94%) of microalgal suspension after 60 min. Pre-treatment of microalgal biomass with 1 N sulphuric acid revealed maximum production of total (487.41 mg g-1) and reducing sugars (277.56 mg g-1). The fermentation of microalgal hydrolysate by Saccharomyces cerevisiae resulted in maximum ethanol content and yield of 0.52 g and 0.052 g g-1 biomass at 96 h of fermentation.
  • ThesisItemOpen Access
    Role of Product Appearance in Consumer Choice of Packaged Food Products for Children
    (Punjab Agricultural University, Ludhiana, 2016) Amanpreet Kaur; Kathuria, Lalit Mohan
    The study was conducted to analyze the perceptions of consumers towards product appearance, and to explore the influence of product appearance on purchase intention of consumers. A sample of 280 respondents was selected using convenience sampling. Data was collected with the help of a structured and non-disguised questionnaire. Data analysis was undertaken using statistical tools like mean-square, chi-square test, analysis of variance, correlation and factor analysis. The study revealed that a large majority of the respondents was aware of packaged food products and were attracted by product appearance. The respondents reported that their children were attracted by product appearance attributes such as flavour, packaging, product ingredient/ fruit content display, cartoon character, shape, color and design. Organised retail outlets and nearby convenience stores were found to be prefered store types for purchase of packaged food products. In- store presentations, friends and relatives and T.V. advertisements were found to be important sources of information. The study highlighted that correlation existed between color, jingle, logo, packaging, cartoon character, and shape. Principle component analysis generated factors such as product shape, packaged design and product ingredient display as different factors influencing the purchase of packaged food products.
  • ThesisItemOpen Access
    Collection, identification and domestication of wild edible Agaricales from Punjab
    (Punjab Agricultural University, Ludhiana, 2019) Amanpreet Kaur; Sodhi, H.S.
    Wild edible Agaricales were surveyed and collected during the month of July-September in the years 2015-2018 from five agro-climatic zones of Punjab. Total 127 mushrooms were collected; 34 mushrooms were collected from sub-mountain undulating zone, 19 wild mushrooms were collected from undulating plain zone, 36 mushrooms were collected from central plain zone, 17 from western plain zone, 21 from western zone. The mushrooms collected belong to genera Agaricus, Lepiota/ Macrolepiota, Pleurotus, Poadaxis, Clitocybe. Tissue culture of 92 wild mushrooms were obtained and total cellulases, cellobiase, endo-β-1,4-glucanase, endoxylanase and laccasse were estimated from pure cultures. Total cellulases ranged between 0.01 to 4.36 U/ml, cellobiase between 0.01 to 8.34 U/ml, endo-β-1,4-glucanase between 0.009 to 6.97 U/ml, endoxylanase between 0.28 to 16.18U/ml and laccasse was 0.02-3.74 U/ml. Based on enzyme producing capability, 18 cultures were identified to study linear growth (mm) on complete yeast agar medium (CYM) and potato dextrose agar (PDA) media, different pH range (5-8), temperature range (25°C-28°C). CYM was proved to be the best medium for AMN 05, AMN 71, AMN 132 and PDA was found good for AMN 14 and AMN 60. The pH 7 was proved as best pH for most of the cultures. AMN 14, AMN 39, AMN 52, AMN 54 and AMN 170 showed maximum growth at 30°C. AMN 39 and AMN 202 were successfully domesticated on wheat straw as substrate. These two cultures were subjected to molecular characterization through 18S rRNA sequencing. AMN 39 showed 100% homology with Pleurotus sapidus and AMN 202 showed the same with Pleurotus floridanus. Yield of Pleurotus sapidus (AMN 39) and Pleurotus floridanus (AMN 202) were compared with Pleurotus sajor-caju and Pleurotus florida and found that yield of Pleurotus sapidus (40 kg/q of dry substrate) and Pleurotus floridanus (47 kg/q of dry substrate) was lower than Pleurotus sajor-caju (52 kg/q of dry substrate) and Pleurotus florida (60 kg/q of dry substrate). It was observed through scanning electron microscope that hyphae of Pleurotus florida was seen to be more tightly packed as compared to Pleurotus sapidus (AMN 39) and Pleurotus floridanus (AMN 202). SDS PAGE was performed to know the heterogeneity among the mushroom proteins. AMN 39 had protein with molecular weight of 16.16 KDa and AMN 202 shown to have two proteins with molecular weight of 17.47 KDa and 42.8 KDa.
  • ThesisItemRestricted
    Computational Fluid Dynamics of Solar Air Heater Duct Roughened with Multiple Arc Rib having Gap and Staggered Rib Piece
    (Punjab Agricultural University, Ludhiana, 2018) Amanpreet Kaur; Hans, V.S.
    Artificial roughening of solar air heater duct wall is the effective method which leads to significant enhancement in heat transfer as well comparable rise in friction losses. The different investigations have been performed by various authors to study the heat transfer rate and friction factor characteristics. In this present study, a numerical investigation is carried out using Computational Fluid Dynamics software ANSYS Academic Research CFD 15.0 to determine the heat transfer rate and thermo-hydraulic performance of rectangular solar air heater duct roughened with multiple arc rib having gap and staggered rib piece. The parameters considered were relative roughness pitch of 8, relative roughness height of 0.043, relative roughness width of 5, relative gap width of 1, arc angle of 60° and relative staggered rib size of 4. The investigation encompassed for the Reynolds number and relative staggered rib pitch range from 2000 to 18000 and 0.2 to 0.8 (4values) respectively. The maximum enhancement in Nusselt number and friction factor was observed to be 3.38 and 6.2 times as compared to smooth duct at relative staggered rib pitch of 0.4. The maximum thermo-hydraulic performance found to be 1.83 for relative staggered rib pitch of 0.4 at Reynolds number of 12000.
  • ThesisItemOpen Access
    Solitary Waves in four component Dusty Plasma using Kappa Distribution of Electrons and Ions
    (Punjab Agricultural University, Ludhiana, 2017) Amanpreet Kaur; Parveen Bala
    Dusty plasma plays important role in space, astrophysical and laboratory environment. The presence of charged dust particles along with other particles in plasma creates solitary waves. An unmagnetized dusty plasma consisting of positively charged dust, negatively charged dust, kappa distributed electrons and ions is considered. The K-dV equation for solitary waves in such plasma system is derived using reductive perturbation method. This K-dV equation describes the solitary waves in dusty plasma and gives the nonlinearity and dispersion effects in such dusty plasma system. The soliton solution is found for the K-dV equation which is of the sech2 form. Both compressive and rarefactive solutions are found in fast and slow modes. The effects of the dusty plasma parameters and kappa parameters on the dynamics of these solitons in both modes are discussed numerically. The kappa distribution has only a quantitative, not a qualitative effect on the existence of solitary waves. The results which, have been obtained from this investigation, would be useful in understanding the properties of nonlinear solitary waves in laboratory and in space dusty plasmas.
  • ThesisItemOpen Access
    Cumulative effect of neem powder, Azotobacter and indole-3-acetic acid (IAA) growth hormone on yield potential of Agaricus bisporus (Lange) Sing
    (Punjab Agricultural University, Ludhiana, 2017) Amanpreet Kaur; Sodhi, H.S.
    A. bisporus is the most popular cultivar among the artificially grown fungi in the world. The mushroom cultivation using agricultural crop lignocellulosic residues has been standardized but the supplementation accurately equilibrates the nitrogen content and the C/N ratio. Neem powder, Azotobacter and Indole-3-acetic acid were used as supplements at different stages of Agaricus bisporus U3 and S11strains. The neem powder was supplemented @ 0.5% to 2.0% in ready compost and spawned at @ 0.7%. The yield potential of Agaricus bisporus U3 was significantly increased upto 29.47% when neem powder was supplemented @ 0.5% and 1.0% at the time of spawning. Azotobacter was added in casing soil @50ml (107-108cfu/ml) in 5kg casing mixture along with neem powder. Use of Azotobacter in the casing had shown 16.0% increase with respect to control I (No addition) a further increase upto 19.41% in yield was recorded, when Azotobacter was applied on bags filled with compost supplemented with 0.5% and 1.0% neem powder respectively. IAA spray at the time of pinhead formation and at the time of 1st flush and 2nd flush showed no significant increase in yield with respect to control I (No addition). However, use of IAA on bags supplemented with 0.5% and 1.0% neem powder and Azotobacter at the time of pinhead formation indicated maximum yield potential of Agaricus bisporus U3. The observations made on quality parameters indicated 2.8 to 3.2 cm stipe length, 3.8 to 4.3cm pileus diameter, color 52.11 to 89.67 L-value and 5125to 11143 hardness was observed in Agaricus bisporus U3. In Agaricus bisporus S11 showed 56.23% increase in yield when neem powder was supplemented @1.0% at the time of spawning. Use of Azotobacter in the casing had shown 31.00% increase with respect to control I (No addition) a further increase of 17.46% in yield was recorded, when Azotobacter was applied on bags filled with compost supplemented with 1.0% neem powder. IAA spray at the time of pinhead formation and at the time of 1st flush and 2nd flush showed no significant increase in yield with respect to control I (No addition). However, use of IAA on bags supplemented with 0.5% and 1.0% neem powder, Azotobacter at the time of 1st flush and 2nd flush indicated maximum yield potential of A. bisporus S11. While in Agaricus bisporus S11 the observations made on stipe length, pileus diameter, color and hardness indicated 2.8 to 3.2cm stipe length, 2.9 to 4.3cm pileus diameter, color 48.3 to 75.9 L-value and 4120 to10364 hardness was observed.
  • ThesisItemOpen Access
    PRODUCT DEVELOPMENT BY USING SELECTED MINOR FIBRES THROUGH WEAVING
    (PAU Ludhiana, 2011) Amanpreet Kaur; Sandeep, Bains
    The present study entitled "Product development by using selected minor fibres through weaving" was carried out in Mansa district. An interview schedule was prepared for collecting data from forty respondents. The results of investigation revealed that majority of the respondents belonged to 25-50 years of age who were illiterate, they belonged to joint families and had a monthly income between Rs.2500-5000. Majority (97.5 percent) of the respondents used waste cotton as minor fibre because it is easily available in the open market. Most of the respondent wove durries in traditional designs by using floral motifs. They created textures using two-types of fibre. Majority used natural fibre for the background and two colours for the motifs. Lattice was the most preferred technique (97 percent) to finish the raw edges. Durrie was the most time consuming article and four craft persons took four days and on each day they wove for four hours to complete a durrie. Out of all the articles the craft persons earned maximum profit from sitter (peedhi). The major problem faced by the respondents were lack of financial assistance and lack of demand for product. Forty four samples were created using minor fibres out of which ten most preferred samples were selected by each judge. Texture made from undyed hemp using twill weave (3/1) was given first rank. Later ten articles were prepared which included bag, purse, tray, belt, slippers, coaster plates, newspaper holder, fan (pakhhi), sitter (peedhi) and file cover. On the basis of fibre suitability, bag and file cover were ranked first by the craft persons and the consumers, respectively. According to the design coaster plates were ranked first both by the craft persons and the consumers. On the basis of colour combinations slippers and coaster plates ranked first by the craft persons and the consumers, respectively. Coaster plates were ranked first both by the craft persons and the consumers according to the overall impact. According to the utility bag and file cover were ranked first by the craft person and the consumers, respectively. Majority of the craft person (57.5 percent) and the consumers (72.5 percent) reported that the quoted price were suitable. Thirty to forty percent can me earned by making innovating articles using minor fibres through weaving.