Utilization of oak tasar silk waste through blending with acrylic fibers for development of yarns and woven fabrics

dc.contributor.advisorGahlot, Manisha
dc.contributor.authorLakhchaura, Pallavi
dc.date.accessioned2019-02-09T09:21:22Z
dc.date.available2019-02-09T09:21:22Z
dc.date.issued2018-03
dc.description.abstractThe present study was planned to see the possibility of blending of oak tasar silk waste and acrylic blended fibres to prepare yarns and woven fabrics. Blending and spinning of fibres were done on cotton spinning system. Five blend ratios (100:0, 60:40, 50:50, 40:60 and 0:100 Oak tasar waste: Acrylic) were prepared at NITRA, Ghaziabad on ring spinning. Their physical properties and imperfection were evaluated. Ten fabric samples were woven from developed yarns on handloom out of which four were blended fabrics with plain weave and four with twill weave. Two were union fabrics each with plain and twill weave in which 100 % acrylic yarn was used as warp and 100 % oak tasar silk yarn was used as weft. The physical (cover factor, cloth cover, fabric weight, fabric thickness, crease recovery angle, bending length, flexural rigidity, drape coefficient, abrasion resistance, pilling, tensile strength, elongation at break and dimension change) and comfort (thermal insulation value, clo, Q-max, air permeability, water vapour transport rate, water absorption, vertical wicking and horizontal wicking) properties were assessed and statistically analyzed using post hoc tukey test and paired t- test. The tenacity values of oak tasar silk and acrylic fibre were comparable. Acrylic fibres were finer as compared to oak tasar fibres. Elongation percent of acrylic fibre was higher as compared to oak tasar fibre. Yarn count of the developed yarns was ranged from medium to fine i.e. 22 Ne to 28 Ne. The physical properties, unevenness and imperfection of blended yarn were improved with the addition of acrylic fibres with oak tasar silk in the blend. Light weight plain weave and twill weave fabrics of oak tasar silk and acrylic blended yarns were developed among them the twill weave fabrics had higher cloth cover, fabric weight and thickness as compared to plain weave fabrics. Most of the physical properties of fabrics were improved with the addition of acrylic fibre in the blend for both plain and twill weaves. Comfort properties like Q-max, air permeability, water vapour permeability, thermal insulation and clo value were found to be increased with increasing acrylic content in the fabric. Most of the comfort properties of different blended and union fabrics were more or less close to each other for both plain and twill weaves. These fabrics may be used for light winter wear clothing and apparels as they were light in weight with clo value comparable to sweater.en_US
dc.identifier.urihttp://krishikosh.egranth.ac.in/handle/1/5810094291
dc.keywordssilk, waste utilization, blending, acrylics, textile fibres, yarns, textile fabricsen_US
dc.language.isoenen_US
dc.pages183en_US
dc.publisherG.B. Pant University of Agriculture and Technology, Pantnagar - 263145 (Uttarakhand)en_US
dc.research.problemSilken_US
dc.subClothing and Textilesen_US
dc.subjectnullen_US
dc.themeTextile Fabricsen_US
dc.these.typePh.Den_US
dc.titleUtilization of oak tasar silk waste through blending with acrylic fibers for development of yarns and woven fabricsen_US
dc.typeThesisen_US
Files
Original bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
PallaviLakhchaura.pdf
Size:
16.57 MB
Format:
Adobe Portable Document Format
Description:
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.71 KB
Format:
Item-specific license agreed upon to submission
Description:
Collections