Loading...
![Thumbnail Image](assets/images/Collection.png)
Thesis
Browse
19 results
Search Results
ThesisItem Restricted Design and Evaluation of Modified Atmosphere Packaging for chillies (Capsicum annum)(Punjab Agricultural University, Ludhiana, 2016) Grewal, Pawanpreet Singh; Ashok KumarThe present study was undertaken to Design and evaluation of Modified Atmosphere Packaging (MAP) for chillies (Capsicum annum) to obtain the maximum shelf life on the basis of quality attributes and sensory evaluation during the storage study experiment. The design of modified atmosphere packaging (MAP) for fresh chilli required an adequate model for prediction of respiration rate as function of both temperature and gas composition. The work was done to study the respiration and transpiration rates of chillies (hybrid CH-1 and Bird‟s eye) at different temperatures viz. 5, 10 and 15°C. The respiration rate was described assuming the mixed model inhibition in the enzyme kinetics model. Arrhenius relationship was used to explain the temperature dependence of respiration rate and transpiration rate of chillies. The transient state equations were numerically solved by Runge-Kutta method for prediction of in-pack gases partial pressure and mathematical model was developed based on firmness and in-pack concentration. A theoretical analysis for design of MAP for selection of appropriate packaging film was carried out by matching the data obtained in respiration study with the permeabilities of commercially available packaging films. Chillies was packed in LDPE and stored under different conditions such as film thickness: 100, 150, 200 gauge; package fill weight = 100, 150, 200g; level of perforations: 10, 15, 20; storage temperature: 5, 10, 15°C. The qualitative analysis of chillies throughout the storage study was done in terms physiological loss in weight, total colour difference, firmness, total soluble solids and ascorbic acid. Sensory evaluation was done on the basis of visual appearance, odour rating and water accumulation. The study also revealed that the low temperature storage better retained the quality and quantity of chillies during its storage. MAP along with low temperature storage helped in enhancing shelf life of hybrid CH-1 and Bird‟s eye upto 26 and 24 days respectively. The optimized conditions obtained for shelf life extension of CH-1 under MAP by using response surface methodology was temperature: 5°C, film thickness: 150 gauge, fill weight: 100 g, perforations: 15 and for Bird‟s eye was temperature: 5°C, film thickness: 100 gauge, fill weight: 100 g, perforations: 15.ThesisItem Restricted Optimization of greenhouse drying process for white button mushroom (Agaricus bisporus)(Punjab Agricultural University, Ludhiana, 2016) Sidhu, Jashandeep Singh; Amarjit SinghThe present study entitled “Studies on optimization of greenhouse drying process for white button mushroom (Agaricus bisporous)” was carried out in the Department of Processing and Food Engineering, Punjab Agricultural University. Mushrooms were pretreated with citric acid and samples without treatment were kept as control. The treated and untreated mushroom samples were dried in greenhouse and open sun during the month of October, 2015.On the basis of microclimate parameters, a mathematical thermal model “BITGREEN” for greenhouse was developed to optimize the drying conditions. The developed model was working satisfactorily to predict the microclimate inside the greenhouse. The drying parameters studied were moisture content, moisture ratio, drying rate, drying air temperatures, solar intensity and relative humidity. The quality parameters included rehydration ratio, shrinkage ratio, colour, texture (hardness), bulk density, protein content and overall acceptability. Moisture content of dehydrated mushrooms reduced from 88-90 (% wb) to 6.5 (% wb) for greenhouse drying (28-46°C) in 48 hours and 8.2 (% wb) for open sun drying (25-32°C) in 72 hours. The Lewis model showed best adequacy of fit for drying of mushrooms. The dried mushrooms were packed in two packaging materials viz. LDPE and PP and stored under refrigerated and ambient conditions for three months. The quality attributes of stored product like colour, texture, rehydration ratio, shrinkage ratio, water gain and overall acceptability were evaluated at 15 days interval. The greenhouse dried mushrooms packed in polypropylene (PP) and stored under refrigerated conditions were found to be highly acceptable upto 75 days of storage. Benefit-Cost ratio of 1.36:1 for subsidized greenhouse revealed that it is profitable to dry mushrooms in greenhouse.ThesisItem Open Access Development of Oil Extraction Method from Kinnow Peel(Punjab Agricultural University, Ludhiana, 2016) Sharma, Pallavi; Tarsem ChandThe study was conducted to develop an oil extraction method from kinnow peel on the basis of shredding of flavedo layer. Mechanical and Solar drying of peel was performed and drying kinetics and physico-chemical characteristics were evaluated. Oil was extracted from fresh peel either by using physical or hydrodistillation method alone or in combination whereas only hydrodistillation method was used in case of dried peel. Qualitative and quantitative analysis of the oil was done. It was observed that oil yield in physical method was 0.179% with a shredding efficiency and extraction time of 88.94% and 25 minutes respectively. The initial and final moisture content of kinnow peel was 316-354.80% and 7.06-7.4% respectively. Luminous intensity and yellowness of peel decreased significantly (p<0.05) in both mechanical and solar drying. Colour difference (∆E) of kinnow peel ranged from 15.33-18.36. Oil retention capacity, total phenols, flavanols, total antioxidant capacity and swelling index decreased significantly (p<0.05) on drying whereas water retention capacity and solubility increased. Highest oil yield was obtained from hydrodistillation from mechanically dried powder. Colour values of varied significantly (p<0.05) with respect to oil extraction method. Physically extracted oil showed highest redness (a) value and whereas highest yellowness (b) was shown by hydrodistilled oil from fresh peel. Saponification value, acid value, specific gravity, refractive index of oil ranged from 181.73-186.90 mg KOH/ g oil, 3.46-5.023 mg KOH / g oil, 0.803-0.856 and1.352-1.486 respectively.ThesisItem Open Access Design and Optimization of Modified Atmosphere Packaging for black carrot (Dacus carota L.)(Punjab Agricultural University, Ludhiana, 2016) Singla, Mohit; Ashok KumarThe present study was undertaken to Design and optimization of Modified Atmosphere Packaging (MAP) for black carrot (Dacus carota L.) to obtain the maximum shelf life on the basis of quality attributes and sensory evaluation during the storage study experiment. Respiration and transpiration rates of black carrot at different temperatures viz. 5, 10 and 15°C were determined. The respiration rate was described assuming the mixed model inhibition in the enzyme kinetics model. Arrhenius relationship was used to explain the temperature dependence of respiration rate, respiratory quotient and transpiration rate of fresh black carrot. A theoretical analysis for design of MAP for selection of appropriate packaging film was carried out by matching the data obtained in respiration study with the permeabilities of commercially available packaging films. Black carrot was packed in LDPE and stored under different conditions such as film thickness: 100, 150, 200 gauge; package fill weight = 100, 300, 500g; level of perforations: 0, 2, 4; storage temperature: 5, 10, 15°C. The qualitative analysis of black carrot throughout the storage study was done in terms physiological loss in weight, total colour difference, firmness, total soluble solids, antioxidants, flavonoids and anthocyanins. Sensory evaluation was done on the basis of visual appearance, odour rating and water accumulation. The study also revealed that the low temperature storage better retained the quality and quantity of fresh black carrot during its storage. MAP along with low temperature storage helped in enhancing shelf life of fresh black carrot upto 24 days. The optimized conditions obtained for shelf life extension of black carrot under MAP by using response surface methodology was temperature: 5°C, film thickness: 200 gauge, fill weight: 500 g, perforations: 0.ThesisItem Restricted OPTIMIZATION OF CONVECTIVE-CUM-MICROWAVE DEHYDRATION OF OYSTER MUSHROOMS (Pleurotus sajor-caju)(2013) Sakti BansalInvestigations were carried out to study the effect of drying parameters viz. loading density, air velocity, power level on convective-cum-microwave dehydration of oyster mushroom. Multi layer drying of commercially grown mushroom cv. Pleurotus sajor-caju was carried out at 3 levels of loading densities (26-52 kg/m2) and air velocities, 3-5 m/s and microwave drying was carried out at 3 power levels (270-810 W). The drying parameters studied were drying rate, temperature and relative humidity of outgoing air, product temperature and heat utilization factor. Quality attributes included rehydration ratio, shrinkage ratio, texture (hardness and chewiness), colour and overall acceptability. Multi layer drying of mushroom with an initial moisture content of 91% wb was carried out at 60°C in a mechanical drier till the moisture content reached 27% wb followed by drying in microwave oven to a final moisture content of 6.89% wb. It was observed that drying rate, relative humidity of outgoing air and heat utilization factor decreased with drying time but opposite trend was observed for temperature of outgoing air and product. The decline in drying rate increased with increase in air velocities and power level whereas opposite trend was observed for loading densities. Increase in loading density and air velocity resulted in decrease in heat utilization factor and relative humidity however temperature of outgoing air and product showed the opposite trend. Logarithmic model showed the highest adequacy of fit for multi layer drying and two term exponential model for microwave drying. The effective moisture diffusivity increased with increase in both loading density and air velocity. The increase in loading density resulted in increase in rehydration ratio, shrinkage ratio, colour change but decrease in texture and overall acceptability. The increase in air velocity resulted in increase in rehydration ratio, hardness, colour change overall acceptability but decrease in shrinkage ratio and chewiness. The increase in power level resulted in increase in rehydration ratio, texture, colour change and decrease in shrinkage ratio and overall acceptability. The optimum conditions for convective-cum-microwave drying of mushroom were found to be 38.80 kg/m2 loading density, 3.86 m/s air velocity and 413.6 W power level. Keywords: Oyster mushroom, drying kinetics, quality, optimizationThesisItem Open Access EFFECT OF ENZYMATIC TREATMENT ON OIL RECOVERY USING MECHANICAL EXPRESSION FROM MUSTARD SEEDS(PAU Ludhiana, 2011) Pawanpreet Singh Grewal; A.K. SinghThe experiments were carried out with the objectives to determine various engineering characteristics and determining the operational parameters for better recovery of oil from two varieties of Mustard seed i.e. PBR-91 and RLC-1. The experiments were designed using response surface methodology for making various combinations of moisture content (6, 9, 12, 15 and 18%w.b.), heating time (2,4,6, 8 and 10 min), heating temperature (40,60,80,100 and 120°C) and enzyme concentration (1, 2, 3, 4 and 5%) and the experiments were conducted using single chamber oil expeller. The quality of oil was determined using acid number and peroxide value. The effect of independent variables i.e. moisture content, enzyme concentration and heating temperature on oil yield and residual oil in cake of PBR-91 and RLC-1 variety were found significant however the effect of the heating time was found non-significant in both the varieties. The highest amount of oil yield is 32.30% at 9% moisture, 4% moisture content, 60°C heating temperature and 8 minute heating time for PBR-91 and 32.09% for RLC-1 at 9% moisture content, 60°C heating temperature and 8 minute heating time. There is 8% increase in the yield of the oil for PBR-91 extracted at optimum level of parameters whereas in RLC-1 there is 8.89% increase in the oil yield compared to untreated seeds. Flow behaviour of oil was studied at different temperatures ( 10, 20, 30, 40 and 50°C) and different moisture level (6, 9, 12, 15 and 18%) at constant shear rate 15 S-1 showed decreasing trend of viscosity with increase in temperature.The flow behaviour of the samples were predicted by the values of consistency coefficient and flow behavoiur index. The range for consistency of oil was found to be 1.32 to 90.12 (PBR-91) and1.13 to 65.12 (RLC-1) for Power law model where as in Casson model it was 4.14 to 24.2 (PBR-91) and 3.12 to 17.3 (RLC-1). The flow behaviour index of PBR-91 ranged from -0.68 to0.94 whereas it varied from 0.18 to 0.96 for RLC-1 in Power law model . The range of yield stress was found to be 4.37 to 432 (PBR-91) and 2.1 to 400.1 (RLC-1) for Casson model.ThesisItem Open Access EFFECT OF PACKAGING MATERIAL ON SHELF LIFE AND QUALITY OF GRAPES (Vitis vinifera L.)(PAU Ludhiana, 2011) Landge Kishor Changdeo; Jarnail SinghThe effect of packaging material on shelf life and quality of grapes cv. Thomson seedless was studied. Material was packed with three different packaging materials viz. Low density polyethylene (LDPE) of 100 guage, Polypropylene (PP) of 90 guage and Laminated aluminum foil (LAF). These samples were stored at 5˚C and 90- 95 % RH in the cold chamber. Control group of grapes samples were stored at room temperature without packaging. During the study viscoelastic behavior, PLW, moisture content, colour , TSS, Ascorbic acid content and Titrable acidity were measured at an interval of 5 days. The grapes stored at refrigerated conditions have shelf life of four weeks as compared to the control samples which has seven days. The LDPE film showed the best performance in terms of maintaining the hardness of fruit. The thickness of loading for packaging containers of grapes was calculated to be 45 cm for samples stored with LDPE. The PLW, variation in moisture content (% db), change in L, a, b colour values was observed to be minimum with LDPE. The quality parameters like Ascorbic acid content, Titrable acidity were least affected with the LAF packaging. The PP was the most effective packaging material for maintaining TSS values of fresh grapes. All the parameters PLW, colour, TSS, Ascorbic acid etc. were observed to be decreased at a faster rate in samples stored at atmospheric conditions in comparison with the samples stored at refrigerated conditions.ThesisItem Restricted MULTI-LAYER DRYING OF GINGER (Zingiber officinale(PAU Ludhiana, 2011) Tarun Garg; Satish KumarInvestigations were carried out to study the effect of drying parameters on multi-layer drying of ginger. The drying parameters studied were moisture content, drying rate, temperature and relative humidity of outgoing air, product temperature and heat utilization factor. Quality attributes included rehydration ratio, coefficient of rehydration, shrinkage ratio, volatile oil content, colour. The multi layer drying was carried out at 60°C in Satake mechanical drier till an average moisture content of 5-6 % was achieved. The total drying time was between 5-16.5 hours. It was observed that moisture content, drying rate, relative humidity of outgoing air and heat utilization factor decreased with drying time but opposite trend was observed for temperature of outgoing air and product. The decrease in moisture content increased with increase in air velocities whereas opposite trend was observed for loading densities. Drying rate was higher for higher air velocity but opposite for loading density. A maximum heat utilization factor was observed for high loading density and low air velocity. Increase in air velocity resulted in decrease in heat utilization factor and relative humidity however temperature of outgoing air and product showed the opposite trend. Similar effect was observed for loading density. At air velocity 3.11 m/s the drying rate was maximum (8.45% db/min) for loading density 27.99 kg/m2 and heat utilization factor was maximum (1.00) for loading density 87.01 kg/m2. The rehydration ratio and coefficient of rehydration were maximum for sample having low loading density and air velocity but shrinkage ratio and volatile oil content were minimum for combinations having high loading density and low air velocity. There was a significant change in colour of fresh and rehydrated samples. The optimum conditions for multi-layer drying of ginger were observed to be 44.66 kg/m2 loading density and 3.5 m/s air velocity and corresponding values of rehydration ratio, coefficient of rehydration, shrinkage ratio, volatile oil and colour change were 4.98, 0.64, 1.87, 1.15 and 5.72 respectively.ThesisItem Open Access PROCESS OPTIMIZATION FOR EXPRESSION OF OIL FROM DEHULLED SUNFLOWER (Helianthus annuus L.) SEEDS(PAU Ludhiana, 2013) Arul Selvam T; Tarsem ChandMechanical expression of oil from dehulled sunflower seed is highly desirable as it provides, at low cost, non-contaminated, nutritionally rich press cakes which can be processed into nutritious edible foods. Unfortunately, mechanical oil extraction process suffers from certain drawbacks. The dehulled sunflower seeds obstruct forward movement inside the expeller barrel due to the absence of hull portion and less friction. The main focus of the present study was to maximize the oil recovery and obtain nutritionally rich press cakes from dehulled sunflower seeds using mechanical oil expression. Physical and mechanical properties were studied under four different moisture content ranged from 6-18 % (d.b.). The results showed that the geometric mean diameter, surface area, volume, sphericity and aspect ratio, thousand seed/kernel weight, true density, porosity, the angle of repose, static coefficient of friction and rupture energy were found to be increasing linearly for seed and kernel. Whereas bulk density, initial cracking force and mean rupture force decreased linearly with the increase of moisture content for both seed and kernel under study. Pre treatments in the form of steaming and addition of bio-based friction materials such as rice bran and wheat bran at different levels were employed. Central composite rotatable design was used to generate a set of experiment at different pretreatment levels during oil expression. A statistical model predicted the maximum oil yield efficiency, maximum protein, minimum fibre, minimum residual oil, minimum chlorogenic acid, minimum free fatty acid and minimum peroxide value of dehulled sunflower oil and press cakes at these optimized variable conditions for rice bran incorporation: steaming time of 10 min, steaming pressure of 0.5 kg cm-2 and rice bran incorporation of 13.88g 100g-1 of dehulled sunflower seed. For wheat bran incorporation it was at steaming time of 15 min, steaming pressure of 1.00 kg cm-2 and wheat bran incorporation of 15g 100g-1 of dehulled sunflower seed. Using these variables results are validated under experimental condition in three independent replicates. Rice bran incorporated oil expression gave best results with high desirability value.
- «
- 1 (current)
- 2
- 3
- »