Thumbnail Image

Kerala Agricultural University, Thrissur

The history of agricultural education in Kerala can be traced back to the year 1896 when a scheme was evolved in the erstwhile Travancore State to train a few young men in scientific agriculture at the Demonstration Farm, Karamana, Thiruvananthapuram, presently, the Cropping Systems Research Centre under Kerala Agricultural University. Agriculture was introduced as an optional subject in the middle school classes in the State in 1922 when an Agricultural Middle School was started at Aluva, Ernakulam District. The popularity and usefulness of this school led to the starting of similar institutions at Kottarakkara and Konni in 1928 and 1931 respectively. Agriculture was later introduced as an optional subject for Intermediate Course in 1953. In 1955, the erstwhile Government of Travancore-Cochin started the Agricultural College and Research Institute at Vellayani, Thiruvananthapuram and the College of Veterinary and Animal Sciences at Mannuthy, Thrissur for imparting higher education in agricultural and veterinary sciences, respectively. These institutions were brought under the direct administrative control of the Department of Agriculture and the Department of Animal Husbandry, respectively. With the formation of Kerala State in 1956, these two colleges were affiliated to the University of Kerala. The post-graduate programmes leading to M.Sc. (Ag), M.V.Sc. and Ph.D. degrees were started in 1961, 1962 and 1965 respectively. On the recommendation of the Second National Education Commission (1964-66) headed by Dr. D.S. Kothari, the then Chairman of the University Grants Commission, one Agricultural University in each State was established. The State Agricultural Universities (SAUs) were established in India as an integral part of the National Agricultural Research System to give the much needed impetus to Agriculture Education and Research in the Country. As a result the Kerala Agricultural University (KAU) was established on 24th February 1971 by virtue of the Act 33 of 1971 and started functioning on 1st February 1972. The Kerala Agricultural University is the 15th in the series of the SAUs. In accordance with the provisions of KAU Act of 1971, the Agricultural College and Research Institute at Vellayani, and the College of Veterinary and Animal Sciences, Mannuthy, were brought under the Kerala Agricultural University. In addition, twenty one agricultural and animal husbandry research stations were also transferred to the KAU for taking up research and extension programmes on various crops, animals, birds, etc. During 2011, Kerala Agricultural University was trifurcated into Kerala Veterinary and Animal Sciences University (KVASU), Kerala University of Fisheries and Ocean Studies (KUFOS) and Kerala Agricultural University (KAU). Now the University has seven colleges (four Agriculture, one Agricultural Engineering, one Forestry, one Co-operation Banking & Management), six RARSs, seven KVKs, 15 Research Stations and 16 Research and Extension Units under the faculties of Agriculture, Agricultural Engineering and Forestry. In addition, one Academy on Climate Change Adaptation and one Institute of Agricultural Technology offering M.Sc. (Integrated) Climate Change Adaptation and Diploma in Agricultural Sciences respectively are also functioning in Kerala Agricultural University.

Browse

End date: 2011 × Thesis Type: M.Tech. ×
Reset filters

Search Results

Now showing 1 - 9 of 49
  • Thumbnail Image
    ThesisItemOpen Access
    Design, fabrication and testing of a power operated jab type paddy dibbler
    (Department of Farm Power Machinery and Energy, Kelappaji College of Agricultural Engineering and Technology, Tavanur, 1997) Maji Krishnan, G; KAU; Jippu, Jacob
    A power operated jab type paddy dibbler developed and tested at K.C.A.E.T, Tavanur is described. A cup feed type metering mechanism, discharged the seeds into the distribution wheel. Rotation of this wheel caused the transfer of seeds from the distribution wheel to the seed tubes. The to and fro motion of the plungers inside the five seed tubes closed and opened the port between the seed tran9fer tube and seed tube at predetermined intervals. A cam and follower arrangement fitted on the main shaft regulated the to and fro motion of the plungers. In operation, the rotation of the dibbler wheel caused the tip of seed tubes to make holes in the soil. At the time of penetration the plunger occupied a position farthest to the main shaft thus keeping the tip of seed tube closed. This prevented the entry of soil into the seed tube. After the seed tube has reached the maximum depth the plunger is moved up quickly transferring the seeds into the holes. The dibbler gave seed rates of 87.1, 74.6, 68.0, and 61.1 kg/ha at the speeds 0.788, 1.152, 1.530 and 1.778 km/h respectively in the field. It placed at an average 3-6 seeds in a hill at a depth of 4-4.2 cm. The number of seeds mechanically damaged was only 0.89 per cent and loss of viability due to mechanical damage was only 3.77 per cent. The average power required was 0.093 hp. Labour requirement was 60.68 man-h/ha. Cost of operation of this dibbler was Rs 86.0/h including the cost of power source. The jab type dibbler is convenient for use by both men and women.
  • Thumbnail Image
    ThesisItemOpen Access
    Developing and testing of a collector-cum-storage types solar water heater for domestic use
    (Department of Farm Power Machinery and Energy, Kelappaji College of Agricultural Engineering and Technology, Tavanur, 2000) Bijukumar, K; KAU; Mohammad, C P
    The present study was undertaken to desi~n and develop a collector-cum-storage type solar water heater of 30 litre capacity to supply hot water for domestic use. Five solar water heaters with different absorber plate positions were constructed. The storage tanks with dimensions of 67 xIl7 x 10 cm were made by using fibre glass, and the top of these storage tanks were covered using single plain glass plates of 71 x 51 x 0.4 cm size. The position of the absorber plate was varied by changing the width of the spacers (4 nos. at an angle of 400 with the side aluminium sheet), which connects bottom aluminium plate and top absorber plate. The absorber plate was of 65 x 45 cm size. The top face of the absorber plate was painted black to absorb maximum solar. radiation. The absorber plate positions were lcm, 3cm, 5cm, 7cm and 9cm from the top glass cover plate and were designated as SWHl 0, SWH30, SWH5.0, SWH7.0 and SWH9.0 respectively. The absorber plate position was optimized by testing the solar water heaters under two different test conditions. Solar water heater II (SWH3.0) outperforms other solar water heaters under the two test conditions. Maximum outlet temperature of 64°C af 3pm and maximum efficiency of 55.72% also at 3pm were observed in solar water heater 11. So it is optimized that the position of the absorber plate should be at 3cm from . the top glass plate. The solar warer heater can easily be handled by a single person since the weight is only 9.5kg. The operating cost per unit of thermal energy obtained withthe solar water heater was found to be 25 paise per kWh.
  • Thumbnail Image
    ThesisItemOpen Access
    Development of powertiller operated paddy reaper windrower
    (Department of Farm Power Machinery and Energy, Kelappaji College of Agricultural Engineering and Technology, Tavanur, 1997) Shiny, Lukose; KAU; Sivaswami, S
    A vertical conveyor reaper-windrower suitable for mounting on KAMCO 9hp powertiller was developed Kerala for the first time. After considering the maneuvrability, weight distribution, field capacity and power transmission, the 1.6m width vertical reaper was selected for the KAMCO powertiller and was locally fabricated. The complete rotavator unit was dismantled and a newly designed power transmission unit was fitted on the KAMCO powertiller. The handle was kept at an ergonomically suitable height of 1m. A combination frame was developed inorder to accommodate both the engine and the reaper at the most appropriate location to achieve the static and dynamic balancing during field operation after the removal of rotavator. The centre of gravity of the engine at the new location was 50mm in front of the wheel axle and at a height of 180mm from its original position. Field evaluation of the reaper was carried out during November and December, 1996 at Tavanur. The front mounted reaper- windrower was evaluated to find out the optimum engine speed and forward speed to achieve better harvesting and windrowing pattern, maximum field capacity and field efficiency with less harvesting losses were found out. For the recommended engine speed of 1200 to 1400rpm at low first and low second gears a forward speed of 0.53 to O. 94m per sec. was obtained in the field. The actual cutting width was 1.5m. The maximum field efficiency of 85 per cent was obtained for first gear when the engine rpm was 1200. Actual field capacity for this speed was 0.224ha per hr. It was seen that for the recommended engine speed between 1200 to 1400rpm a normal forward speed of (.53 to 0. 94m/sec was obtained with an average actual field capacity of 0.25 ha/hr and an average total grain loss of 1.9 per cent in the field. Downward handle reaction for this recommended speeds varied between 9 to 14 kgf at the time releasing the clutch or using the accelarator. By the use of powertiller reaper a labour saving of 82.5 per cent was obtained. The owner would get a monitory benefit of Rs.1210/ha while the farmer hiring the reaper would get a saving of Rs.830/ha compared to manual harvesting. The initial invest of the owner would be paid back within 2 years if he could hire it out for 1000hrs per year. The total weight of the unit is 451kg which is 34kg less than the original weight the powertiller with rotavator unit. Its overall dimensions are L:279S x W: 1650 x h: 1510mm and the total cost is Rs.1,16,500.
  • Thumbnail Image
    ThesisItemOpen Access
    Design fabrication and testing of an arecanut dehusker
    (Department of Farm Power Machinery and Energy, Kelappaji College of Agricultural Engineering and Technology,Tavanur, 1993) Febi Varghese; KAU; Jippu Jacob
    A power operated arecanut dehusker is designed, developed and its performance evaluated. The major parts are the hopper, feeder, lead plate, cutting blade, shearing roller, friction plate and scraper. The feeder receives the graded fruit from the hopper and delivers it on the lead plate. The fruit is compressed between the rotating shearing roller and the lead plate. The teeth on the roller peel off the husk and the kernel is ejected out through the slot on the lead plate and the husk removed. A single phase 0.5 hp motor operates the machine. From the studies, the optimum set - up of the machine for deriving maximum dehusking efficiency and Iower percentage of the number kernels damaged is at a speed of 35 rpm, blade angle of 600 and slot angle of 1400. At this set - up the machine gives an output of 9.0 kg dried fruit/h, with 84.5 per cent dehusking efficiency.
  • Thumbnail Image
    ThesisItemOpen Access
    Effect of land use on water yield from small agricultural watersheds of western ghats
    (Department of Land and Water Resources and Conservation Engineering, Kelappaji College of Agricultural Engineering and Technology, Tavanur, 1993) Abdul Hakkim, V M; KAU; Xaviour Jacob, K
    Effect of deforestation and other land use changes brought about by human activities of hydrologic cycle continues to be of great concern. A study was conducted to assess the effect of land use on water yield from small agricultural watersheds of Western Ghats of Kerala. Four small watersheds planted with cashew, rubber, coffee and tea were selected for the study. To get information regarding rainfall, temperature, humidity and daily evaporation; raingauges, thermometers and USWB class A Pan evaporimeters were installed in each watershed. The runoff which is of specific concern was measured using stage level recorders along with weirs and flumes. Infiltration measurements were done using double cylinder infiltrometers. Soil samples were collected from each watershed and were analysed for grain size distribution, soil pH and organic carbon content. Different geomorphological characteristics of the watersheds were also worked out. Analysis of rainfall and runoff data indicated that nearly 50 per cent of the total rain fall leaves these watersheds as runoff except in the case of rubber watershed. The infiltration studies indicated that all these watersheds have high infiltration rates even after saturation, thereby absorbing even the most intense storms of the study period. From the hydrograph analysis of these watersheds it was observed that the hydrographs attain a sharp peak immediately as the rainfall and there is a baseflow which is folowing through the 3 watersheds, except in the case of rubber watershed. The rubber watershed is very small and lies adjacent to the Kuttiadi reservoir. The interflow from the rubber watershed was observed to join the reservoir avoiding the measuring channel. From the soil profile analysis of Western Ghat region it was observed that there is an impermeable clay layer lying below the laterite having an average thickness of 3.5 m located at 7 to 10.5 m below the ground surface. The results of the study leads to the conclusion that the infiltrated rain water meets the impermeable layer and there it flows laterally through the soil. This lateral interflow reaches the valley portion of the watersheds where it saturates the soil. This saturated area acts like an impervious layer producing 100 per cent surface runoff and it is responsible for the sharp peak of hydrographs. Runoff is generated from these source areas and Hortanian overland flow is a rare phenomenon in these watersheds. Thus from the study it was concluded that land use has no significant effect on water yield from the selected small agricultural watersheds of Western Ghats of Kerala.
  • Thumbnail Image
    ThesisItemOpen Access
    Effect of landslope on uniformity of water distribution of sprinklers
    (Department of Land and Water Resources and Conservation Engineering, Kelappaji College of Agricultural Engineering and Technology,Thavanur, 1996) Jigimon T; Joby V Paul
    A study was conducted at Keleppaji College of Agricultural Engineering and Technology, Tavanur to find out the effect of land scope on sprinkler uniformity. A single nozzle sprinkler was used for the study. The study was carried out over an artificial platform. The water distribution pattern for three slopes viz; 12.5 %, 10.0 % and 7.5 % was studied for three riser positions viz; vertical, mid way and perpendicular to the land. Isohytes were drawn for the various positions in wind and no wind conditions for the three slopes. The uniformity coefficient, Cu values were evaluated and the spacing between the sprinklers for good overlap was found out. It is found that the water distribution is decreasing as the land slope is increasing. The perpendicular position was the ideal position for all the slopes. The optimum riser angles for various slopes are found to be 70 7 ‘30’ ‘for 12.5 % slope, 50 42 ‘38’ ‘for10.0 % slope and 40 17 ‘21’ ‘for 7.5 % slope with respect to the vertical position. The rpm of the sprinkler head for three riser positions was studied. In vertical position the rpm was almost same in all the slopes. It was decreasing as the riser position was changing from vertical to perpendicular in every slope. The rpm was less in wind conditions than in no wind conditions. The erosivity was also measured. The amount of soil collected for the various positions was evaluated. It was found that the amount of soil loss is increasing with the increase in land slope. It was maximum in vertical position, less in mid way position and least in perpendicular position for all the land slopes.
  • Thumbnail Image
    ThesisItemOpen Access
    Development of rational formulae to predict the advance and recession flow in border irrigation method
    (Department of Irrigation and Drainage Engineering, Kelappaji College of Agricultural Engineering and Technology, Tavanur, 1992) Mary Regina, F; KAU; Ramadevi, A N
    An investigation was undertaken to develop the predictive relationship for water advance and recession in field borders with cow pea as the test crop. The experiment was conducted at the KCAET, Tavanur during February-April 1992. Border strips of 2 m width and 40m length were used for the study. The strips were laid out on three different slopes, 0.4 %, 0.3%, and 0.2%. Stream sizes of 4 Ips, 3 Ips, and 2 Ips per meter widths were used to irrigate the strips. There was nine treatments each replicated twice. Advance and recession times were noted at every 5 m distance from the upstream end of border. Advance and recession curves were plotted to draw conclusions on the effect of the three parameters viz stream size, slop and distance on advance and recession times. Uniformity of irrigation was also analysed for the different treatments and the treatment with 0.2% slope and 4 Ips/m width stream size showed the best uniformity. Multiple linear regression was done considering stream size, slope and distance from upstream end as independent variables. Advance and recession times were taken as dependent variables. Rational formulae to predict the advance and recession times were developed from the results of the multiple regression analysis.
  • Thumbnail Image
    ThesisItemOpen Access
    Studies on the Effects of Various Parameters on the Performance of Petti and Para
    (Department of Irrigation and Drainage Engineering, Kelappaji College of Agricultural Engineering and Technology, Tavanur, 1994) Saji Kuriakose, M; KAU; John Thomas
  • Thumbnail Image
    ThesisItemOpen Access
    Evaluation and modification of powertiller operated paddy reaper
    (Department of Farm Power Machinery and Energy, Kelappaji College of Agricultural Engineering and Technology, Tavanur, 1995) Selvan, P; KAU; Sivaswami, N
    The study on power tiller operated paddy reaper-windrower was taken up solve the problems of labour scarcity and uneconomic cost of cultivation of paddy. The 1.6 m vertical conveyer reaper-windrower was fabricated and was mounted with commercially available 8-10 hp air cooled Mistubishi power tiller. Improvements and modifications were carried out to make the unit suitable for harvesting of paddy in Kerala. The original engine chasis of the power tiller was replaced with a newly fabricated chasis on which both the engine and paddy harvester were mounted. Difficulties were experienced in starting and in operating the harvester when the drive was taken directly from the engine pulley to the cutterbar. Initialy the unit was operated with rotovator at the rear side. It was found difficulty in crossing the bunds, hence rotovator was removed. After detailed studies, an auxiliary gear box was designed and fabricated for transmitting power to reaper from the rotovator gear assembly. The rear rotovator was dismantled and the auxiliary gear box was assembled. For balancing, a counter weight of 35 kg was added in between the handles. The crop is cut by the reciprocating knife while passing through crop dividers, star wheels, pressure springs and is conveyed by a pair of lugged conveyer belts and is discharged as a neat windrow. Improvements and modifications were carriedout on most of the reaper components. Field evaluation of paddy harvester was carried out at KCAET Tavanur for two seasons. It was found that harvester has an effective cutting width of 1.55 m and an average field capacity of 0.02036 ha/hr. The pre harvest loss, sickle loss, shattering loss and total cutter bar loss were found to be 0.005 per cent, 2.43 per cent and 0.026 per cent respectively. The power tiller operated reaper-windower was found suitable for harvesting paddy both in wet as well as dry fields except the fully lodged crops. It is an appropriate machinery for harvesting paddy and is found economically and technically suitable for Kerala conditions. It was calculated that manual harvesting needs Rs. 1625/ha whereas power tiller operated reaper needs only Rs. 348/ha and thus achieved a saving of amount of Rs. 1277/ha. The savings of 186 man-hrs/ha achieved by the introduction of power tiller operated paddy reaper is a promising solution for the crisis of labour scarcity and the high cost of labour input in the paddy cultivation.