Thumbnail Image

Kerala Agricultural University, Thrissur

The history of agricultural education in Kerala can be traced back to the year 1896 when a scheme was evolved in the erstwhile Travancore State to train a few young men in scientific agriculture at the Demonstration Farm, Karamana, Thiruvananthapuram, presently, the Cropping Systems Research Centre under Kerala Agricultural University. Agriculture was introduced as an optional subject in the middle school classes in the State in 1922 when an Agricultural Middle School was started at Aluva, Ernakulam District. The popularity and usefulness of this school led to the starting of similar institutions at Kottarakkara and Konni in 1928 and 1931 respectively. Agriculture was later introduced as an optional subject for Intermediate Course in 1953. In 1955, the erstwhile Government of Travancore-Cochin started the Agricultural College and Research Institute at Vellayani, Thiruvananthapuram and the College of Veterinary and Animal Sciences at Mannuthy, Thrissur for imparting higher education in agricultural and veterinary sciences, respectively. These institutions were brought under the direct administrative control of the Department of Agriculture and the Department of Animal Husbandry, respectively. With the formation of Kerala State in 1956, these two colleges were affiliated to the University of Kerala. The post-graduate programmes leading to M.Sc. (Ag), M.V.Sc. and Ph.D. degrees were started in 1961, 1962 and 1965 respectively. On the recommendation of the Second National Education Commission (1964-66) headed by Dr. D.S. Kothari, the then Chairman of the University Grants Commission, one Agricultural University in each State was established. The State Agricultural Universities (SAUs) were established in India as an integral part of the National Agricultural Research System to give the much needed impetus to Agriculture Education and Research in the Country. As a result the Kerala Agricultural University (KAU) was established on 24th February 1971 by virtue of the Act 33 of 1971 and started functioning on 1st February 1972. The Kerala Agricultural University is the 15th in the series of the SAUs. In accordance with the provisions of KAU Act of 1971, the Agricultural College and Research Institute at Vellayani, and the College of Veterinary and Animal Sciences, Mannuthy, were brought under the Kerala Agricultural University. In addition, twenty one agricultural and animal husbandry research stations were also transferred to the KAU for taking up research and extension programmes on various crops, animals, birds, etc. During 2011, Kerala Agricultural University was trifurcated into Kerala Veterinary and Animal Sciences University (KVASU), Kerala University of Fisheries and Ocean Studies (KUFOS) and Kerala Agricultural University (KAU). Now the University has seven colleges (four Agriculture, one Agricultural Engineering, one Forestry, one Co-operation Banking & Management), six RARSs, seven KVKs, 15 Research Stations and 16 Research and Extension Units under the faculties of Agriculture, Agricultural Engineering and Forestry. In addition, one Academy on Climate Change Adaptation and one Institute of Agricultural Technology offering M.Sc. (Integrated) Climate Change Adaptation and Diploma in Agricultural Sciences respectively are also functioning in Kerala Agricultural University.

Browse

2018 - 20204
Reset filters
Subject: Processing and Food Engineering × Author: KAU × End date: 2020 × Start date: 2018 × Type: Thesis × Thesis Type: M.Tech. ×
Reset filters

Search Results

Now showing 1 - 4 of 4
  • Thumbnail Image
    ThesisItemOpen Access
    Studies on combined technologies of pulsed electric field and microwave assisted process for extraction of pectin from Jackfruit rind and core
    (Department of processing and food engineering, Kelappaji college of Agricultural engineering and Technology, Tavanur, 2020) Nandhu Lal, A M; KAU; Prince, M V
    Value addition of inedible parts of Jackfruit such as rind and core using efficient and environment friendly methods would reduce wastage, and its disposal problem and also fetch additional profit to farmers. Pectin, a secondary food ingredient used as gelling, stabilizing and emulsifying agent in food products is such a valuable by-product having nutritional as well as health benefits. Conventional extraction method includes direct boiling using acidified water, which is time consuming and degrades quality pectin. Application of combined novel technologies might help in conquering the inadequacies of conventional methods. In this study, a pulsed electric field and microwave assisted extraction system for extracting pectin from Jackfruit rind and core was developed. To evaluate the developed system towards pectin extraction, the effect of process parameters influencing pectin yield and energy consumption such as PEF strength (5, 10 and 15 kV/cm); PEF treatment time (2, 4 and 6 min); microwave power density (450, 550 and 650 W/g) and time of exposure (5, 10 and 15 min) were studied. The physicochemical and quality parameters of extracted pectin such as moisture content, ash content, protein content, viscosity, solubility, colour, equivalent weight, methoxyl percentage, galacturonic acid and degree of esterification of the pectin were analyzed and compared with that obtained through conventional extraction. A PEF strength of 11.98 kV/cm, PEF treatment time of 5.46 min, microwave power density of 647.55 W/g and time of exposure of 5 min were found to be the optimized process variables of the combined treatment. High methoxyl pectin of good quality was obtained through the combined process. The moisture content, viscosity, ash content, protein content, equivalent weight, methoxyl percentage, galacturonic acid and degree of esterification of the combined PEF and microwave treated samples were 8.95 %, 39.78 cP, 6.78 %, 3.283 %, 557.473 g/mol, 8.37 %, 69.44 % and 68.43 % respectively with light brown colour whereas that of conventional extracted pectin were respectively 10.04 %, 38.14 cP, 7.27 %, 9.98 % 466.905 g/mol, 9.376 %, 67.85 % and 78.45 % with dark drown colour pectin. Scanning Electron Micrographs of jackfruit powder samples before and after combined treatment and conventional extraction revealed an increase in rupture and severing of parenchymal cells of the combined treated samples indicating better extraction efficiency. It was concluded that combined pulsed electric field and microwave treatment resulted in increased extraction of high quality pectin from Jackfruit rind and core.
  • Thumbnail Image
    ThesisItemOpen Access
    Development of Neera Powder using spray drying process
    (Department of Processing and Food Engineering, KCAET,Tavanur, 2019) Anjali, A V; KAU; Santhi Mary, Mathew
    The Coconut Palm (Cocos nucifera) is one of the most important crops grown in humid tropics, cultivated for its multiple utilities, belongs to Arecaceae family. Since most of the components of coconut palm is getting transformed to useful products, it is referred to as “Tree of life”. Neera is a delicious health drink collected from the immature unopened inflorescence of coconut palm. It is a nector like liquid having slightly alkaline pH and translucent in color. Neera is a rich source of natural sugars, minerals and vitamins and it contains substantial amounts of iron, phosphorus and ascorbic acid. The major difficulty associated with neera production is its natural fermentation. The product undergoes fermentation within 2-3 hours under ambient temperature. Thus the shelf life of the sap is identified as a major issue in the long distance transport of neera. The only solution is the development of neera powder by spray drying technology, so that it will arrest the fermentation by reducing the available water. This study mainly concentrated on development of a process protocol for spray dried neera powder, standardization of the spray drying parameters and quality analysis of neera powder. The neera used in the study was collected from two different sources, CPCRI (Kalparasa) and KAU (Keramrutham). The optimum parameters obtained for Kalparasa powder was 3.53% MD+0.353% GA as feed material combination, an inlet air temperature of 168ºC and 4.25 rpm feed flow rate. Whereas for the Keramrutham powder the obtained optimum condition is 7.58% MD+0.758% GA as feed material combination and 171.89ºC inlet air temperature with 4.82 rpm feed flow rate. The blower speed of 1200 rpm and air pressure 2kg/cm2 were kept constant for developing the products. The physico chemical characteristics such as pH, TSS, Colour, moisture content, and reconstitution properties were determined. The optimally produced products were packed, stored in retort pouches and the quality characteristics such as pH, moisture content, vitamine C, antioxidant activity and phenolic content were also analysed up to 5 months. Both powders showed good acceptance in the sensory evaluation. The cost analysis of the product was done and cost of one kilogram was estimated as Rs 2168.6/-.
  • Thumbnail Image
    ThesisItemOpen Access
    Develpment and evaluation of protein enriched RTE extruded food products
    (Department of Processing and Food Engineering, KCAET, Tavanur, 2019) Athira, K; KAU; Rajesh, G K
    Malnutrition causes major health problems due to qualitative and quantitative insufficiency of dietary protein and calories intake. Protein energy malnutrition is a serious threat especially in children in developing countries. Fortification or combination of two or more food ingredients can make a solution for this nutritional insufficiency to a certain extend. Food products with improved nutritional profile can be produced by blending legumes. Ready to eat food products are plays a major role in modern consumer’s diets. Extrusion cooking is a novel technology adopted by food industries as it is a rapid, continuous and cost-effective process. Therefore, an investigation has been taken up to develop a protein enriched ready to eat food products from rice, ragi, Bengal gram, ground nut and soybean using extrusion cooking. The feed composition selected for the extrusion were 60% rice, 10% ragi, 10% Bengal gram, 10% soybean and 10% groundnut flour and the physico chemical analysis of the feed mix was conducted and recorded. The process variables used in the study were temperature (120,130 and 140°C), moisture content (12, 14 and 16%) and screw speed (300, 350 and 400 rpm). The optimisation of process parameters was analysed using RSM based on the quality characteristics of the extrudates. The optimum operating conditions of extrusion process namely, barrel temperature, moisture content and screw speed was found to be 140°C, 12.20% and 383.96 (384) rpm respectively. The storage studies of optimally produced extrudates were conducted by using different packaging materials (LDPE and laminated aluminum) and packaging technologies (Active and passive MAP). The extrudates packed in laminated aluminum with active MAP had good overall acceptability after three months of storage and they were microbiologically safe. The total production cost of 1kg of extruded RTE product was found to be Rs. 113.29/-.
  • Thumbnail Image
    ThesisItemOpen Access
    Development and quality evaluation of thermally processed cassava in retort pouch
    (Department of Processing and Food Engineering, Kelappaji College of Agricultural Engineering and Technology, Tavanur, 2018) Rasmi Janardhanan; KAU; Rajesh, G K
    Cassava (Manihot esculenta Crantz), popularly known in India as tapioca, is one of the important food crops providing livelihoods and food security for millions of people in the tropical regions. High moisture content of cassava, leads to early deterioration due to microbial attack and also makes it susceptible to desiccation and mechanical injury. Therefore effort has to be put in so that cassava is made available to all the people year-round either in raw, preserved or processed manner. Therefore, an investigation has been taken up to develop and optmise a process protocol, which could contribute to cassava based industries. The study was conducted on two varieties of cassava namely, Sree Jaya and M-4. The physicochemical analysis of both the varieties were conducted and recorded. The blanching time at 100 ̊C was optimized and quality improvement with addition of 0.1 per cent guar gum was conducted. The blanching time for M-4 was optimised as 5 minutes in 0.1 per cent guar gum and for Sree Jaya the blanching time was optmised as 15 minutes in 0.1 per cent guar gum. Calcium chloride brine with 0.4 per cent concentration was selected as the filler solution. Thermal processing was conducted at 100, 110, 121 ̊C with different time combinations. The retort pouch processing parameters were optimised and the shelf life studies of the microbiologically safe samples were conducted for six months at refrigerated condition and three months at ambient conditions. From the storage studies and the sensory analysis it was concluded that Sree Jaya thermally processed at 110 ̊C for 20 minutes with F0 2.1 and M-4 thermally processed at 110 ̊C for 40 minutes with F0 6.1 are the best thermal processing treatments. The quality parameters and the sensory attributes of the processed cassava were best throughout the storage period. The cost of one pouch of 100 g was estimated to be Rs.19.20/- only. The optimised treatment resulted in a product which resembled the fresh sample, available to the consumers in a ready to eat form throughout the year.