Kerala Agricultural University, Thrissur

The history of agricultural education in Kerala can be traced back to the year 1896 when a scheme was evolved in the erstwhile Travancore State to train a few young men in scientific agriculture at the Demonstration Farm, Karamana, Thiruvananthapuram, presently, the Cropping Systems Research Centre under Kerala Agricultural University. Agriculture was introduced as an optional subject in the middle school classes in the State in 1922 when an Agricultural Middle School was started at Aluva, Ernakulam District. The popularity and usefulness of this school led to the starting of similar institutions at Kottarakkara and Konni in 1928 and 1931 respectively. Agriculture was later introduced as an optional subject for Intermediate Course in 1953. In 1955, the erstwhile Government of Travancore-Cochin started the Agricultural College and Research Institute at Vellayani, Thiruvananthapuram and the College of Veterinary and Animal Sciences at Mannuthy, Thrissur for imparting higher education in agricultural and veterinary sciences, respectively. These institutions were brought under the direct administrative control of the Department of Agriculture and the Department of Animal Husbandry, respectively. With the formation of Kerala State in 1956, these two colleges were affiliated to the University of Kerala. The post-graduate programmes leading to M.Sc. (Ag), M.V.Sc. and Ph.D. degrees were started in 1961, 1962 and 1965 respectively. On the recommendation of the Second National Education Commission (1964-66) headed by Dr. D.S. Kothari, the then Chairman of the University Grants Commission, one Agricultural University in each State was established. The State Agricultural Universities (SAUs) were established in India as an integral part of the National Agricultural Research System to give the much needed impetus to Agriculture Education and Research in the Country. As a result the Kerala Agricultural University (KAU) was established on 24th February 1971 by virtue of the Act 33 of 1971 and started functioning on 1st February 1972. The Kerala Agricultural University is the 15th in the series of the SAUs. In accordance with the provisions of KAU Act of 1971, the Agricultural College and Research Institute at Vellayani, and the College of Veterinary and Animal Sciences, Mannuthy, were brought under the Kerala Agricultural University. In addition, twenty one agricultural and animal husbandry research stations were also transferred to the KAU for taking up research and extension programmes on various crops, animals, birds, etc. During 2011, Kerala Agricultural University was trifurcated into Kerala Veterinary and Animal Sciences University (KVASU), Kerala University of Fisheries and Ocean Studies (KUFOS) and Kerala Agricultural University (KAU). Now the University has seven colleges (four Agriculture, one Agricultural Engineering, one Forestry, one Co-operation Banking & Management), six RARSs, seven KVKs, 15 Research Stations and 16 Research and Extension Units under the faculties of Agriculture, Agricultural Engineering and Forestry. In addition, one Academy on Climate Change Adaptation and one Institute of Agricultural Technology offering M.Sc. (Integrated) Climate Change Adaptation and Diploma in Agricultural Sciences respectively are also functioning in Kerala Agricultural University.

Browse

Search Results

Now showing 1 - 9 of 9

Open Access
Water balance study of Karuvannur river basin
(Department of Irrigation and Drainage Engineering, Kelappaji College of Agricultural Engineering and Technology, Tavanur, 1988) Santosh, G Thampi; KAU; John Thomas, K
This study was undertaken to quantitavely assess the water resources of the Karuvannur River Basin and to study the monthly water balance in order to estimate the balance for ground waterrecharge or depletion during the period 1976 to 1985. The mean monthly rainfall over the basin during the period 1976-1985 was determined by Thiessen polygon method . Data regarding the amount of water released for irrigation from the Peechi reservoir was also collected. Due to lack of data, contribution from other sources was not taken into account. The total runoff from the basin during each month of this period was determined . The various crop combinations in the basin were identified and the area under each of these was estimated . The actual evapotranspiration during each month was estimated using the method outlined by Doorenbos and Kassam. The basin was regarded as an independent hydrologic unit . Hence surface and subsurface inflow and outflow were assumed to be negligible.
Open Access
Development of a low cost garden tractor
(Department of Agricultural Engineering, College of Horticulture, Vellanikkara, 1982) Sivaswami, M; KAU; Muhammad, C P
The study was conducted with the objectives of systematic analysis of components with respect to their kinematics, dynamics and ergonomics and evaluation of traction performance and economics of low cost garden tractor. A greaves Lombardini 5.4 hp diesel engine with 1800 rpm was selected and a simple three step speed reduction system having a single stage V belt drive and double stage chain drives with a pivotted countershaft clutch have been designed. A road speed of 6.635 kmph and field speed of 3.317 kpmh were achieved by using a cone pulley arrangement with 6.00 x 12 size wheel.Correct position of various components bringe the centre of gravity of the unit with and without implement at very close to the final drive axle for easy balancing
Open Access
Development of small scale equipment for extraction of cocoa butter and production of cocoa powder
(Department of Agricultural Engineering, College of Horticulture, Vellanikkara, 1982) Ganeshan, V; KAU; George, T P
The primary objective of this project was to evolve a viable technology and equipment system for small scale processing of cocoa beans. The study mainly concentrated on the development of an extraction unit for the separation of butter from cocoa mass. Various equipment required for small scale processing of cocoa beans were either identified or designed.
Open Access
Design, fabrication and testing of a power operated paddy dibbler
(Department of Farm Power Machinery and Energy, Kelappaji College of Agricultural Engineering and Technology, Tavanur, 1996) Jayarajan, R; KAU; Jippu, Jacob
A 2-row power operated paddy dibbler was designed, fabricated and tested at Kelapaji College of Agricultural Engineering and Technology, Thavanur. The main components of the dibbler were two seed boxes, plungers reciprocating within the seed tubes, fluted roller seed metering mechanism, dibbler wheels, stationary cam, frame and transport wheels. The seed tubes were fixed radially around the dibbler wheel with 45 mm of it projecting outwards for penetrating the soil. The plunger was actuated by a stationary cam and during its upward stroke it uncovered the farther end of the seed transfer tube and transferred the seeds into the seed tube and then into the holes made in the soil. In the downward stroke the plunger closed the seed transfer tube. Simultaneously the fluted roller transferred the seeds in to the seed transfer tube. The average speed of operation of the dibbler was 1.32 kmph and its field capacity and field efficiency were 0.031 ha/h and 78.18 per cent respectively. The average number of seeds dropped per hill was 5 and the seed rate obtained was 78 kg/ha. The seeds were placed within the confines of the holes made by the seed tube and plunger. There was absolutely no scattering. The depth of placement varied from 3.8 to 4.6 cm. The operating cost of the dibbler was Rs. 502.58/ha. This mechanism offers scope for developing dibblers with more number of rows for being operated more economically.
Open Access
Modification and performance evaluation of six row rice transplanter for conventional seedlings
(Department of Farm Power Machinery and Energy, Kelappaji College of Agricultural Engineering and Technology, Tavanur, 1990) Bainu, T Kuzhively; KAU; Sivaswami, M
The work was carried out at the Kelappaji College of Agricultural Engineering and Technology, Tavanur. The six – row rice transplanter was originally designed for mat type seedlings. Considering the importance of a transplanter using conventional type seedlings, the above transplanter was modified. The modifications were completed in three stages. The performance evaluation of the modified six row rice transplanter was conducted after each stage of modification. The average number of seedlings per hill could be reduced from the average value of six seedlings per hill before modification to 2.27 seedlings per hill after the modifications. The missing hills percentage was brought down from 20.83 per cent to 5.55 per cent and the floating hills percentage was reduced from 10 to 5.55. Percentage of damaged hills was reduced from 23.3 to 8.8. The field capacity of the machine was improved from 0.0139 ha/hr to 0.0162 ha/hr and field efficiency from 48.26 percent to 56.87 per cent. The use of the modified transplanter is profitable if it is operated beyond one hectare per annum. It gives a saving of Rs. 618.00 per hectare compared to the conventional hand transplanting giving a 2. 4 times reduction in total cost. The pay back period of the modified transplanter is 2.24 years when the annual utilization is 2 hectares per annum and 1.13 years when the annual utilization is 3 hectares per annum.
Open Access
Synthetic generation of streamflow data using computer simulation model
(Department of Land and Water Resources and Conservation Engineering, Kelappaji College of Agricultural Engineering and Technology, Tavanur, 1993) Leven , K V; KAU; Jobi V, Paul
A Study has been made to develop a computer simulation model for the synthetic generation of streamflow data for Chaliyar, one of the larger basins of the state. The data were collected from different river gauging stations for different durations. A suitable mathematical model namely Thomas Fiering Model was developed for the generation of synthetic data. The model was fitted for the observed monthly steamflows. The validity of the model was checked by comparing the statistical parameters of historical and generated data and by comparing the flow duration curves. It is seen that the model preserves various statistical parameters like mean, standard deviation and correlation coefficient. The study reveals that the computer simulation model developed is a very effective tool in the proper management of water resources system.
Open Access
Effect of soil solarization using ldpemulch on moisture conservation and soil temperature variation
(Department of Land and Water Resources and Conservation Engineering, Kelappaji College of Agricultural Engineering and Technology, Tavanur, 1997) Anu Varghese; KAU; John Thomas, K
Soil solarization is based on mulching the soil surface with transparent polyethylene sheets which capture the solar radiation and thus heat the soil to a level lethal for various pests. Solarization is useful in the control of weeds and also helps in moisture conservation. To some extent this can satisfy the demand of water for pre sowing irrigation during the summer months by conserving the moisture in the soil. In the experiment two types of polyethylene sheets (0.10 mm and 0.05 mm) were used and three durations of solarization, i.e., 30 days, 40 days and 50 days were tried. A crop (bhindi) was sown in the area after the solarization period to know the effect of solarization on its performance. The average maximum soil temperature at 5 cm depth obtained in the non-solarized plots was 49.5°C only, but in solarized plots it went upto 56.5°C. The magnitude of rise in soil temperature of solarized treatments was higher due to 0.05 TP than 0.10 TP. The intensity of solar radiation reaching the soil surface was significantly higher in the non-solarized plots than in the solarized plots. There was significant increase in the moisture content values in the solarized plots compared to the non solarized plots at 5, 10 and 15 cm depth below the soil surface. The moisture content values in 0.05 TP solarized plots were slightly higher than in 0.10 TP solarized plots, but was not significant. In the solarized treatments, there was 37.9, 33.7 and 38.3 per cent increase in the moisture content values at 5, 10 and 15 cm depths respectively. Solarization also had significant effect in lowering the weed count as well as the dry weight of the weeds for around 5 months after the period of solarization. The yield of bhindi was significantly higher in the solarized treatments than in the non-solarized treatments. This increase in the yield of bhindi may be due to the drastic reduction in weed count and dry weight on account of solarization.
Open Access
Development and testing of a rotary type black pepper cleaner
(Department of Farm Power Machinery and Energy, Kelappaji College of Agricultural Engineering and Technology, Tavanur, 1995) Abdul Wahab, V S; KAU; Jippu, Jacob
A power operated rotary type black pepper cleaner is developed, tested and its performance evaluated. The major parts are an inclined circular disc, an involute shaped scraper, a feeding unit and a collecting tray. The black pepper admixture is fed to the drum sieve through a hopper. By rotating the sieve, feed material fall uniformly over one-half of the area of the inclined rotating disc. Good pepper grains being nearly spherical in shape roll down at one end, whereas foreign materials which cannot roll down as freely, is scraped out at the other end by means of an involute scraper. Both cleaned and uncleaned grains are received in a collecting tray placed below the disc. A 3-phase 0.5 HP variable speed dynodrive motor along with a 10:1 gear reduction unit operates the machine. The important physical properties of black pepper relevant to cleaning process are also studied. The trials are repeated for the surfaces of mica and cotton under different levels of feed rate, angle of inclination and speed. Better performance is obtained in the case of cotton surface. Under these conditions, a cleaning efficiency of 88 per cent is obtained at a feed rate of 12 kg/h, angle of disc 11o and at a speed of 10 rpm. The cost of the machine excluding the power unit comes to Rs. 1’100/-. The operating cost of machine is found to be Rs. 16.45/h. It is recommended for further studies and modifications.
Open Access
Sea water intrusion studies for coastal aquifers
(Department of Irrigation and Drainage Engineering, Kelappaji College of Agricultural Engineering and Technology, Tavanur, 1988) Saley, Abraham; KAU; .John Thomas, K
Studies were conducted in three villages along the coastal areas of Trichur district, namely, Nattika, Talikulam and Edamuttam, to know the extent of sea water intrusion through aquifers. Observations were made in existing wells along an alignment normal to the coast line. Aquifer parameters and fresh water flow through the aquifer were computed making use of borehole data available for the region. The positions of the interfaces were determined using established formulae. The possible shifting of the interfaces due to reduction In fresh water discharge consequent to future increased rate of pumping was predicted. In each village, -three wells were taken for the study purpose. In all the cases, the maximum rates of pumping for various depths of wells, which will not cause sea water intrusion problems, have been deter¬mined. Chemical analysis showed that, at present there was no salt water intrusion in the wells under study. The results of the present study lead to a better understanding of the sea water intrusion problem, the determination of the position of the interfaces for various pumping rates might be effectively used in fixing the location of wells, pumping rates and depth of wells. The study would be made use of designing a ground water system in coastal areas for a better utilisation of ground water resources.

Kerala Agricultural University, Thrissur

Browse

Thesis Type

Type

Author

Date

Subject

Search Results