Loading...
Thumbnail Image

Govind Ballabh Pant University of Agriculture and Technology, Pantnagar

After independence, development of the rural sector was considered the primary concern of the Government of India. In 1949, with the appointment of the Radhakrishnan University Education Commission, imparting of agricultural education through the setting up of rural universities became the focal point. Later, in 1954 an Indo-American team led by Dr. K.R. Damle, the Vice-President of ICAR, was constituted that arrived at the idea of establishing a Rural University on the land-grant pattern of USA. As a consequence a contract between the Government of India, the Technical Cooperation Mission and some land-grant universities of USA, was signed to promote agricultural education in the country. The US universities included the universities of Tennessee, the Ohio State University, the Kansas State University, The University of Illinois, the Pennsylvania State University and the University of Missouri. The task of assisting Uttar Pradesh in establishing an agricultural university was assigned to the University of Illinois which signed a contract in 1959 to establish an agricultural University in the State. Dean, H.W. Hannah, of the University of Illinois prepared a blueprint for a Rural University to be set up at the Tarai State Farm in the district Nainital, UP. In the initial stage the University of Illinois also offered the services of its scientists and teachers. Thus, in 1960, the first agricultural university of India, UP Agricultural University, came into being by an Act of legislation, UP Act XI-V of 1958. The Act was later amended under UP Universities Re-enactment and Amendment Act 1972 and the University was rechristened as Govind Ballabh Pant University of Agriculture and Technology keeping in view the contributions of Pt. Govind Ballabh Pant, the then Chief Minister of UP. The University was dedicated to the Nation by the first Prime Minister of India Pt Jawaharlal Nehru on 17 November 1960. The G.B. Pant University is a symbol of successful partnership between India and the United States. The establishment of this university brought about a revolution in agricultural education, research and extension. It paved the way for setting up of 31 other agricultural universities in the country.

Browse

Search Results

Now showing 1 - 8 of 8
  • ThesisItemOpen Access
    Feasibility Study Of Rice Bran Oil As Fuel In Compression Ignition Engine
    (Govind Ballabh Pant University of Agriculture and Technology;Pantnagar, 2003) Jayant Singh; Mishra, T. N.
  • ThesisItemOpen Access
    Investigations on the use of soybean oil as fuel in constant speed diesel engine
    (Govind Ballabh Pant University of Agriculture and Technology;Pantnagar, 2003) Bol, Mekalilie Benjamin; Bhattacharya, T.K.
  • ThesisItemOpen Access
    Planning and management of land and water resources in Nagini watershed of Uttranchal using G.I.S. and remote sensing
    (Govind Ballabh Pant University of Agriculture and Technology;Pantnagar, 2006) Singh, Ramesh; Sharma, H.C.
  • ThesisItemOpen Access
    Design and development of winged subsoiler with leading tines and maize crop response to subsoiling
    (G.B. Pant University of Agriculture and Technology, Pantnagar (Uttarakhand), 2003) Arun Kumar; Thakur, T.C.
  • ThesisItemOpen Access
    Erosion Status Delineation And Probabilitic Water Management Planning For Soan River Catchment In Sub-Himalayas
    (Govind Ballabh Pant University of Agriculture and Technology;Pantnagar, 2002) Ashwani Kumar; Singh, J.K.
  • ThesisItemOpen Access
    Standardization of Jatropha oil ethyl esterification process parameters and evaluation of a CI engine on esterified fuel
    (Govind Ballabh Pant University of Agriculture and Technology;Pantnagar, 2006) Kundu, Krishnendu; Bhattacharya, T.K.
  • ThesisItemOpen Access
    Studies On Diesel-Renewable Liquid Fuel Blends As Constant Speed Ci Engine Fuel
    (Govind Ballabh Pant University of Agriculture and Technology;Pantnagar, 2003) Mukesh Singh; Bhattacharya, T.K.
  • ThesisItemOpen Access
    Studies on parametric standardization of mechanical oil expression of Jatropha seeds
    (G.B. Pant University of Agriculture and Technology, Pantnagar - 263145 (Uttarakhand), 2008-01) Yaduvanshi, Birjesh Kumar; Bhattacharya, T.K.
    In order to meet the growing requirements of energy, the government has envisaged a plan to supplement the petroleum fuels to a larger extent by biofuels which chiefly comprises biodiesel and bioethanol. The biodiesel programme emphasizes on production of biodiesel from non-edible oils derived from Jatropha (Jatropha Curcas L.), Karanja (Pongamia Pinnata), Mahua (Madhuca Inidica), Neem (Azadirachta indica), Jojoba (Simmondsia chinensis), etc. Amongst these, jatropha has been identified as a major source for production of biodiesel and an ambitious programme has been launched to cultivate jatropha on wasteland available in India. An average production of 5 tonne per hectare can produce about 2 tonne of biodiesel. The seeds of jatropha contain 35 to 50 percent oil whereas its kernel contains 45 to 60 percent oil. There is no established process for oil expression from jatropha seed and mechanical oil expellers exclusively for jatropha seed are not available. The conventional mechanical oil expellers are generally used to extract oil from jatropha seed and oil recovery is very low. It is expected that expression of oil from jatropha seed is not only governed by physical properties of seed but factors like seed moisture content, hull content in seed–kernel hull mixture as well as configuration of wormset of an oil expeller may also have significant effect on oil expression. Studies were, therefore, conducted to standardize the mechanical oil expression parameters of jatropha seed using a 1 TPD, MERADO make, mechanical oil expeller. No expression of oil from whole jatropha seed was observed at seed moisture content of 7.3%. Therefore, different higher levels of seed moisture content were attained by cold and hot water sprinkling, hot water soaking and steaming treatments. The expression of oil using seed kernel alone resulted in formation of pastes inside the compression chamber, therefore, seed kernels were mixed with 10, 20, 30 and 40 percent hull. The expression of oil by changing wormset configurations were also studied. It was observed that average length, width and thickness of jatropha seed was 17.8 mm, 11.1 mm and 8.6 mm respectively. The mass of thousand seed was found to be 581.4 g with initial moisture content of 7.3%. The oil content of seed was 36.6% and that of kernel as 61.2%. The whole jatropha seed treatment using steam at 1050C for 15 min raising the moisture content of seed from 7.3% to 18.2% is recommended. The oil expression, efficiency of oil expression, specific power consumption and expeller throughput at above treatment were 26.8%, 73.3%, 0.136 kW/kg, 28.2 kg/h and Rs. 1.8 per kg respectively.