Thumbnail Image

Theses

Browse

20161
Reset filters
Author: Hareesha Shidenur, T × End date: 2016 × Start date: 2016 ×
Reset filters

Search Results

Now showing 1 - 1 of 1
  • Thumbnail Image
    ThesisItemOpen Access
    Development and evaluation of a jackfruit peeler cum corer
    (Department of Food and Agricultural Process Engineering , Kelappaji College of Agricultural Engineering and Technology, Tavanur, 2016) Hareesha Shidenur, T; KAU; Santhi Mary, Mathew
    India is the largest producer of jackfruit followed by Bangladesh and Thailand. Kerala, which lies in the southernmost part of Western Ghats, is well known for its diversity in jackfruit with cultivated area of 90,225 ha and production of 294 million fruits per year. Peeling, coring and bulb separation of jackfruit are time consuming, causes drudgery and very tedium in manual operation. However, a major chunk of the production is wasted due to lack of post-harvest technological interventions, andhence jackfruit isconsidered as underutilized fruit. The present study aims at development and evaluation of a jackfruit peeler cum corer machine. The principle operation of the machine is, as the jackfruit rotates peeling was done helically due to the linear motion of the blade from bottom to top. Similarly cutting-coring operation was performed by screw mechanism which pressed the core removing tool against the fruit and cut into four portion. Finally bulbs were separated manually. Performance evaluation of the machine was conducted in the laboratory to optimize the speed of fruit holder (90, 120 and 150 rpm) and corer pulley (110, 130 and 150 rpm) with three size of jackfruit, by considering the minimum processing time and bulb wastage with higher efficiency. The peeling operation at optimized speed (90 rpm) showed minimum bulb wastage for small (7.85%), medium (7.24%) and large (6.20%) sized fruits with high peeling efficiency of 85.27, 83.51 and 80.64% with a trend of increasing operational time of 38.24, 44.58 and 50.34 secrespectively. Similarly coring operation at optimal speed (130 rpm) showed processing time of 16.98, 22.39 and 24.83 sec and high coring efficiency of 92.85, 90.32 and 82.03% with bulb wastage of 10.337, 7.81 and 6.09% respectively. The average power consumption of optimal operational speeds for medium size jackfruit with load was found as 0.0149±0.0029 kWh/fruit whereas in without load condition was found to be 0.0104±0.0007 kWh/fruit. As per the comparative study, the average time taken for peeling, cutting-coring and bulb separation was more (28.8 min/fruit) during manual operation and in case of mechanical operation it was only 13.3 min/fruit. The maximum throughput of machine was 37.5 kg/h, whereas in manual operation 17.36 kg/h. The cost of the machine has been estimated as Rs. 46950/-. The operational cost of the machine was Rs. 52.97/h whereas, in manual operation, it wasRs. 47.5/h. The benefit-cost ratio of the developed machine was 2.32:1 and in case of manual operation, it was2.66:1.