Thumbnail Image

Theses

Browse

1995 - 19962
Reset filters
Subject: Agricultural Engineering × Author: KAU × End date: 1996 × Start date: 1994 × Type: Thesis × Thesis Type: M.Tech. ×
Reset filters

Search Results

Now showing 1 - 2 of 2
  • Thumbnail Image
    ThesisItemOpen Access
    Design, fabrication and testing of a power operated paddy dibbler
    (Department of Farm Power Machinery and Energy, Kelappaji College of Agricultural Engineering and Technology, Tavanur, 1996) Jayarajan, R; KAU; Jippu, Jacob
    A 2-row power operated paddy dibbler was designed, fabricated and tested at Kelapaji College of Agricultural Engineering and Technology, Thavanur. The main components of the dibbler were two seed boxes, plungers reciprocating within the seed tubes, fluted roller seed metering mechanism, dibbler wheels, stationary cam, frame and transport wheels. The seed tubes were fixed radially around the dibbler wheel with 45 mm of it projecting outwards for penetrating the soil. The plunger was actuated by a stationary cam and during its upward stroke it uncovered the farther end of the seed transfer tube and transferred the seeds into the seed tube and then into the holes made in the soil. In the downward stroke the plunger closed the seed transfer tube. Simultaneously the fluted roller transferred the seeds in to the seed transfer tube. The average speed of operation of the dibbler was 1.32 kmph and its field capacity and field efficiency were 0.031 ha/h and 78.18 per cent respectively. The average number of seeds dropped per hill was 5 and the seed rate obtained was 78 kg/ha. The seeds were placed within the confines of the holes made by the seed tube and plunger. There was absolutely no scattering. The depth of placement varied from 3.8 to 4.6 cm. The operating cost of the dibbler was Rs. 502.58/ha. This mechanism offers scope for developing dibblers with more number of rows for being operated more economically.
  • Thumbnail Image
    ThesisItemOpen Access
    Development and testing of a rotary type black pepper cleaner
    (Department of Farm Power Machinery and Energy, Kelappaji College of Agricultural Engineering and Technology, Tavanur, 1995) Abdul Wahab, V S; KAU; Jippu, Jacob
    A power operated rotary type black pepper cleaner is developed, tested and its performance evaluated. The major parts are an inclined circular disc, an involute shaped scraper, a feeding unit and a collecting tray. The black pepper admixture is fed to the drum sieve through a hopper. By rotating the sieve, feed material fall uniformly over one-half of the area of the inclined rotating disc. Good pepper grains being nearly spherical in shape roll down at one end, whereas foreign materials which cannot roll down as freely, is scraped out at the other end by means of an involute scraper. Both cleaned and uncleaned grains are received in a collecting tray placed below the disc. A 3-phase 0.5 HP variable speed dynodrive motor along with a 10:1 gear reduction unit operates the machine. The important physical properties of black pepper relevant to cleaning process are also studied. The trials are repeated for the surfaces of mica and cotton under different levels of feed rate, angle of inclination and speed. Better performance is obtained in the case of cotton surface. Under these conditions, a cleaning efficiency of 88 per cent is obtained at a feed rate of 12 kg/h, angle of disc 11o and at a speed of 10 rpm. The cost of the machine excluding the power unit comes to Rs. 1’100/-. The operating cost of machine is found to be Rs. 16.45/h. It is recommended for further studies and modifications.