Skip navigation
Beta Version
Thesis
2021
MPUT Udaipur

The American Gear Manufacturers Association (AGMA 2101-D04) is the most pre-eminent experiential based scientific gear stress analysis method for determining root bending stress and contact stress in involute spur gears. However, based on the same basic principles, they have developed to such a level that, for various reasons, they are not necessarily in accord...

1
0
0
0
Ashish Verma.pdf.jpg
Thesis
2020-04-30
MPUT, UDAIPUR

Present research has been motivated from the need of generation of more power. The objectives of present work are focused towards designing a new biometrically modified windmill blade and its aerodynamic performance analysis. Three different model of new blade have been designed by adding a special feature on leading edge of the windmill blade called as tubercles ...

1
28
0
0
TANUSHREE SONI.pdf.jpg
Thesis
2019
MPUT, UDAIPUR

This work was aimed for Design, Development and Analysis for enhancement of biooil recovery from fast pyrolysis of biomass. In this study a shell and tube condenser is designed in such a way that it improves the heat transfer in the condenser which results in improved production of bio-oil. The condenser design is improved by providing the tubes and segmental b...

1
20
0
0
Thesis
2020
MPUAT, Udaipur

Abrasive flow machining (AFM) is the non-conventional process used to finish the workpiece surface internally to geta micro-level finish. The aim of our study to explore the new area of application by design manufacture and evaluation of the developed system for the function of cleaning the internal passes. The study is carried out on AFM, how their parameter affec...

1
0
0
0
NIKHIL KACHHARA.pdf.jpg
Thesis
2019-08-16
MPUT, UDAIPUR

Friction factor play important role to study of the material flow, behaviour of material to achieve the desired product with minimum effort in processes of rolling, extrusion and forging, therefore in designing a metal-forming operation it is necessary to minimise friction between metal surfaces. Importance of this thesis work is to study and analysis coefficient o...

1
26
0
0
Deepa Singh.pdf.jpg
Thesis
2019
MPUT, UDAIPUR

Manufacturing with machining contributes to a larger extent in most of the industry as even the formed parts needs finishing by removal of material. The conventional machining processing involving common machine tools is making use of modern technology high production through better tooling and computer numerical control machining. The conventional material can...

1
18
0
0
Thesis
2020-12
MPUT, UDAIPUR

Injection molding is growing and most promising industry for mass production of plastic products. Increased application on thin wall products leads to various issues relation to plastic molding. Plastic fill and shrinkage is the most crucial quality characteristics on which injection molding industry is concerned for their plastic products. A study is intended to f...

1
7
0
0
Nagendra Singh Ranawat.pdf.jpg
Thesis
2019-09-06
MPUT, UDAIPUR

Leak is one of the major problems faced in the transportation of water, oil and gas through pipelines. To improve the efficiency of this system leak must be detected and located as early as possible to minimize the loss of the flowing commodity in the pipeline. Internal leak detection system is most commonly used technique which depends on sensing of the flow param...

1
40
0
0
Preeti Chauhan.pdf.jpg
Thesis
2019-09-09
MPUT, UDAIPUR

Electric discharge machine has been acknowledged as better technique for surface modification of biomedical implants. It has many advantages over other previously used technique. Chemical vapour deposition CVD, Plasma vapour deposition PVD and anodising and nitriding etc. needs surface treatment before these technique as processed. This increases their processing c...

1
20
0
0