Loading...
Anand Agricultural University, Anand
Anand Agricultural University (AAU) was established in 2004 at Anand with the support of the Government of Gujarat, Act No.(Guj 5 of 2004) dated April 29, 2004. Caved out of the erstwhile Gujarat Agricultural University (GAU), the dream institution of Sardar Vallabhbhai Patel and Dr. K. M. Munshi, the AAU was set up to provide support to the farming community in three facets namely education, research and extension activities in Agriculture, Horticulture Engineering, product Processing and Home Science. At present there seven Colleges, seventeen Research Centers and six Extension Education Institute working in nine districts of Gujarat namely Ahmedabad, Anand, Dahod, Kheda, Panchmahal, Vadodara, Mahisagar, Botad and Chhotaudepur
AAU's activities have expanded to span newer commodity sectors such as soil health card, bio-diesel, medicinal plants apart from the mandatory ones like rice, maize, tobacco, vegetable crops, fruit crops, forage crops, animal breeding, nutrition and dairy products etc. the core of AAU's operating philosophy however, continues to create the partnership between the rural people and committed academic as the basic for sustainable rural development. In pursuing its various programmes AAU's overall mission is to promote sustainable growth and economic independence in rural society. AAU aims to do this through education, research and extension education. Thus, AAU works towards the empowerment of the farmers.
Browse
44 results
Search Results
ThesisItem Open Access RESPONSE OF DIFFERENT LEVELS OF PLANTING DISTANCE AND NITROGEN ON GROWTH AND FLOWERING OF CHINA ASTER (Callistephus chinensis L. Nees) Cv. "Kamini"(AAU, Anand, 2005) PATEL, KETULKUMAR KACHARABHAI; Patel, H. C.A field experiment was conducted at college Nursery of B.A. College of Agriculture, Anand Agricultural University, Anand during the year 2003-04 with the objects to study the response of different levels of planting distance and nitrogen on growth and flowering of China aster Cv. 'Kamini' with 9 treatment combinations in Factorial Randomized Block Design which was replicated thrice, considering three levels of planting distance (30 x 10 cm, 30 x 20 cm and 30 x 30 cm) and three levels of nitrogen (100,200 and 300 kg/ha). The wider planting distance D3 (30 x 30 cm, 1,11,111 plants/ha) exerted the greatest influence on various growth parameters such as number of branches (31.00). Further, the wider planting distance also recorded maximum fresh weight of individual flower (1.83 g), number of flowers per plant (32.48), flower diameter (4.89 cm) and length of flower stalk (27.23 cm), minimum number of days required for first flowering (95.99 days), 50 % flowering (112.62 days) and increased nitrogen content of leaf (1.98 %). However, due to low plant density the widest planting distance had produced lowest flower yield (6.82 t/ha). On the other hand, the closest planting distance D1 (30 X 10 cm, 3,33,333 plants/ha) recorded the higher value for some of growth parameter such as plant height (55.54 cm) and lower value for individual flower diameter (4.47 cm) because of high plant density but same treatment has produced the maximum flower yield of 15.00 t/ha. An application of higher dose of nitrogen (300 kg/ha) produced maximum plant height. (54.16 cm) and number of branches (30.39). Further, it also recorded the maximum fresh weight of individual flower (1.96 g). number of flowers per plant (35.19), flower yield per plant (69.77 g) and flower yield per hectare (13.08 t/ha). This treatment also recorded minimum number of days taken for first flowering (97.92 days) and 50 % flowering (111.06 days). It also increased nitrogen content of leaf (2.41 %) as compared to lower levels (100 and 200 kg/ha). The optimum dose of nitrogen (200 kg/ha) gave maximum vase life of flowers (8.00 days). The interaction effect between different levels of planting distance and nitrogen were found to be significant on weight of individual flower, number of flowers per plant, flower yield per plant and per hectare. Treatment combination D3N3 (30 x 30 cm and 300 kg N/ha) produced highest weight of individual flower (2.23 g), number of flowers per plant (40.40) and flower yield per plant (90.71 g). However, the treatment combination D1N3 (30 X 10 cm and 300 kg N/ha) produced highest flower yield per hectare (18.83 t/ha). Finally, in commercially cultivated China aster crop Cv. Kamini grown at narrow planting distance (30 x 10 cm) alongwith adequate supply of nitrogen (300 kg/ha) could be recommended for highest flower production under Gujarat conditions.ThesisItem Open Access TO STUDY THE EFFECT OF PACLOBUTRAZOL, CYCOCEL AND ITS METHOD OF APPLICATIONS ON VEGETATIVE GROWTH, FLOWERING AND FLOWER YIELD OF ANNUAL CHRYSANTHEMUM (Chrysanthemum coronarium L.) cv. Local White(AAU, Anand, 2004) MASU, MUDASSIRBHAI M.; SADARIA, D. T.An experiment was carried out at Department of Horticulture (College Nursery), B. A. College of Agriculture, Gujarat Agricultural University, Anand Campus, Anand during the winter season of 2002. The treatment comprised of three different methods viz., root dip (RD), soil drench (SD) and foliar spray (FS) with two concentrations of paclobutrazol (100 ppm and 200 ppm) and cycocel (500 ppm and 1000 ppm). The paclobutrazol (100 ppm and 200 ppm) and cycocel (500 ppm and 1000 ppm) treatment were done at 30, 60 and 90 DAT whereas, root dip (RD) was applied at the time of transplanting of seedlings. The experiment was laid out in Randomized Block Design with thirteen treatments including the control. The results revealed that root dip method of application of paclobutrazol @ 100 ppm (RD-T1) produced significantly lowest plant height (10.20 cm), highest number of branches per plant (20.67), plant spread (652.68 cm2), leaf area index (0.56 cm2 /plant), crop growth rate (1.54 g/m2/t) over control at harvest. The maximum days for emergence of first flower (56.25 days) and days required to 50% flowering (65.75 days) were recorded with the soil drench method of application of paclobutrazol @ 100 ppm (SD-T5) after transplanting which were significantly superior over control at harvest. However, the soil drench method of application of paclobutrazol @ 100 ppm (SD-T5) produced lowest plant height (56.87, 73.78, 82.21 cm respectively) whereas, highest number of branches per plant (32.13, 42.14, 49.50 respectively), plant spread (3350.04, 6186.71 and 8419.01 cm2 respectively), leaf area index (9.83, 15.75 and 20.20 cm2/plant respectively), crop growth rate (5.11, 6.44 and 1.26 g/m2/t respectively) at 60, 90 DAT and at the time of harvest. The soil drench method of application of paclobutrazol @ 100 ppm (SDT5) produced maximum flower diameter (6.67 cm), fresh weight of flower (3.58 g), number of pickings (16.50), number of flowers per plant (159.50) and flower yield per plant (571.01 g), net plot (4568.08 g) and hectare (28.19 t). The different were significant as compared to control at time of harvest. The highest net realization Rs. 128937 /ha with C.B.R (1 : 10.70) was obtained with treatment of soil drench method of application of paclobutrazol @ 100 ppm (SD-T5) as compared to all other treatments.ThesisItem Open Access EFFECT OF TRANSPLANTING DATE AND SPACING ON GROWTH, YIELD AND QUALITY OF ONION (Allium cepa L.) cv. LOCAL WHITE(AAU, Anand, 2004) PATEL, HIRENKUMAR DHIRAJLAL; Sadaria, D. T.The present investigation was undertaken with a view to determine the effect of transplanting date and spacing on growth, yield and quality of onion (Allium cepa L.) cv. 'Local White' at Horticultural Research Farm, Department of Horticulture, B. A. College of Agriculture, Anand Agricultural University, Anand during the rabi season of the year 2003-04. There were three transplanting dates viz., 15th October (Di), 1st November (D2) and 15th November (D3) with four levels of spacing viz., 10 x 7.5 cm (Si), 10 x 10 cm (82), 15 x 10 cm (S3) and 15 X 15 cm (S4). Thus, there were twelve treatment combinations arranged in split-plot design with four replications. The transplanting date D2 (1st November) exerted great influence on plant height (69.54 cm), number of leaves per plant (9.54) and length of leaves (56.25 cm) at 90 DAT. Girth of leaves found significant at 75 DAT (2.92 cm). Further, the average bulb weight remain unaffected by different transplanting dates. However, D2 (1st November) produced The present investigation was undertaken with a view to determine the effect of transplanting date and spacing on growth, yield and quality of onion (Allium cepa L.) cv. 'Local White' at Horticultural Research Farm, Department of Horticulture, B. A. College of Agriculture, Anand Agricultural University, Anand during the rabi season of the year 2003-04. There were three transplanting dates viz., 15th October (Di), 1st November (D2) and 15th November (D3) with four levels of spacing viz., 10 x 7.5 cm (Si), 10 x 10 cm (82), 15 x 10 cm (S3) and 15 X 15 cm (S4). Thus, there were twelve treatment combinations arranged in split-plot design with four replications. The transplanting date D2 (1st November) exerted great influence on plant height (69.54 cm), number of leaves per plant (9.54) and length of leaves (56.25 cm) at 90 DAT. Girth of leaves found significant at 75 DAT (2.92 cm). Further, the average bulb weight remain unaffected by different transplanting dates. However, D2 (1st November) produced maximum 'C grade bulb (9.38 kg/ plot). Different spacings had no any significant effect on bolting percentage, neck thickness, total soluble solids, dry matter and sulphur content of the bulb. The interaction effects between transplanting date and spacing were found significant for neck thickness, twin bulb percentage and 'C grade bulb weight per net plot. Treatment combination of D1S4 produced maximum neck thickness (1.06 cm). D1S4 produced maximum twin bulb percentage (3.10) followed by D1S4 (2.91). The lowest twin bulb percentage (0.45) observed with D1S4, treatment combination. The treatment combination of D1S4 produced highest weight of 'C grade bulbs (11.64 kg/ plot) followed by D3S1 (10.64 kg/ plot). From the results of the investigation it could be concluded that the treatment combination of D2S1 (1st November transplanting with 10 x 7.5 cm spacing) gave maximum yield (578.70 q/ha) and net profit (Rs. 1,40,297/ha).ThesisItem Open Access EFFECT OF BIOFERTILIZERS AND NITROGEN ON GROWTH, YIELD AND QUALITY OF CABBAGE (Brassica Oleracea var. capitata L.) CV. 'GOLDEN ACRE' UNDER MIDDLE GUJARAT AGROCLIMATIC CONDITIONS(AAU, Anand, 2005) SOLANKI, RAKESHKUMAR DASHRATHBHAI; PATEL, H. C.The present investigation entitled "Effect of biofertilizers and nitrogen on growth, yield and quality of cabbage {Brassica oleracea var. capitata L.) cv. 'Golden Acre' under middle Gujarat agro-climatic conditions" was conducted during the year 2004-05 at the Horticultural Research Farm, Department of Horticulture, B. A. College of Agriculture, Anand Agricultural University, Anand. A field experiment was laid out in Randomized Block Design with ten treatment combinations and three replications consisting of different levels of nitrogen along with Azospirillum, Azotobacter and Azospirillum + Azotobacter. The recommended dose of N (200 kg ha-1) was taken as control. The results revealed that treatment Tg (175 kg N ha-1+ Azospirillum +Azotobacter) gave significantly the highest plant height (32.07 cm) and fresh weight of plant (1608.00 g), which was followed by treatment T, (Recommended dose of nitrogen i.e. 200kg/ha (control)). Treatment T8 (175 kg N ha-1+ Azospirillum + Azotobacter) also gave the highest number of leaves per plant (19.95) and plant spread (2260.20 cm2) and they were at par with the treatments T1 (Recommended dose of nitrogen i.e. 200 kg/ha (control)), T2 (175 kg N ha-1 + Azospirillum) T5 (175 kg N ha-1 + Azotobcter) and treatment T9 (150 kg N ha-1 Azospirillum +Azotobacter). However, dry weight of plant was found to be non-significant. Treatment T8 (175 kg N ha-1+ Azospirillum +Azotobacter) recorded the highest average weight of cabbage head (1321.88 g), diameter of cabbage head (15.50 cm), volume of cabbage head (1293.65 cm3), yield per net plot (22.29 kg), yield per hectare (364.10 q) and minimum days to 50% head formation (43.33), and it was at par with treatment T1 (Recommended dose of nitrogen i.e. 200 kg/ha (control)). In quality aspects, head compactness (86.06 %) was significantly influenced by Treatment T8 (175 kg N ha-1+ Azospirillum +Azotobacter) but it was at par with treatment T1 (Recommended dose of nitrogen i.e. 200 kg/ha (control)). However, moisture percent in cabbage head was found to be non-significant. Looking to the economics of various treatments, it is revealed that treatment T8 (175 kg N ha-1+ Azospirillum +Azotobacter) recorded the highest net realization (Rs.62, 195 ha-1) as well as highest cost benefit ratio (1:3.15) and it was followed by treatment T1 (Recommended dose of nitrogen i.e. 200 kg/ha (control)) i.e.1: 2.90. In nutshell, it can be concluded from the present study that the treatment T8 (175 kg N ha-1+ Azospirillum +Azotobacter) recorded the highest values in growth, yield and quality attributes. Though, treatment T8 (175 kg N ha-1+ Azospirillum +Azotobacter) recorded higher values in all the characters, which was at par with T1 (Recommended dose of nitrogen i.e. 200 kg/ha (control)). Thus, it would be appropriate to use treatment T8 (175 kg N ha-1+ Azospirillum +Azotobacter) for potential yield and better quality of cabbage cv. 'Golden acre' as it reduces the use of nitrogen 25 per cent by using biofertilizers without adversely affecting on growth, yield and quality parameters as well as economic return.ThesisItem Open Access EFFECT OF FOLIAR APPLICATION OF Fe' AND Zn' ON GROWTH, FLOWERING AND YIELD OF CHINA ASTER (Callistephus chinensis L. Nees)(AAU, Anand, 2005) Rajput, Sandip Govind; Joshi, K. I.The present investigation entitled "Effect of foliar application of 'Fe' and 'Zn' on growth, flowering and yield of China aster (Callistephus chinensis L. Nees)" was carried at College Nursery of B.A. College of Agriculture, Anand Agricultural University, Anand during the rabbi season of 2004 - 05. The treatments comprising two micronutrients viz., FeS04 (@ 0.2%, 0.4%, 0.6%, and 0.8%) and ZnS04 (@ 0.3%, 0.4%, 0.5% and 0.6%) each sprayed at 30, 45 and 60 days after transplanting along with control were tried in Randomized Block Design with three replications. The results revealed that application of ZnS04 @ 0.5% (Tg) at an interval of 30, 45, and 60 days after transplanting produced significantly maximum plant height (62.48cm), plant spread (24.53cm East-West direction and 26.72cm North-South direction), and number of branches (22.40) per plant. The next best treatment was FeS04 @ 0.4% (T3), which recorded significantly maximum number of leaves (396.79) per plant at maturity stage and required significantly minimum days for emergence of first flower bud (61.97) and for full opening of first flower (82.13) as compared to control (70.75 and 91.11 days, respectively). Treatment ZnS04 @ 0.5% (T8) recorded significantly maximum flower stalk length (28.43cm) followed by treatment FeS04 @ 0.4% (26.84cm) as compared to control (21.29cm), however effect on flower diameter was non significant. The treatment of ZnS04 @ 0.5% (T8) recorded the significantly the highest number of flowers (63.24) and weight of flowers (164.42 g) per plant as well as flower yield (182.69q) per hectare as compared to control. The next best treatments was FeS04 @ 0.4% (T3), also gave significantly higher values for number, weight and yield of flowers as compared to control and remained at par with T§ treatment. The application of ZnS04 @ 0.5% (T8) and FeS04 @ 0.4% (T3) produced flowers with significantly maximum vase life 9.53 days and 9.47 days, respectively as compared to 7.40 days in control. In case of shelf life differences were found not significant.ThesisItem Open Access RESPONSE OF BIOFERTILIZERS AND CHEMICAL FERTILIZERS ON GROWTH AND YIELD OF VEGETABLE CLUSTER BEAN (Cyamopsis tetragonoloba (L). Taub) CV. PUSA NAVBAHAR IN MIDDLE GUJARAT AGROCLIMATIC CONDITIONS(AAU, Anand, 2005) Patel, Sanjaykumar Rameshchandra; Patel, H. C.A field experiment was conducted at the Horticultural Research Farm, B. A. College of Agriculture, Anand Agricultural University, Anand during Kharif season of the year 2004 with the objectives of studying the "Effects of Biofertilizers and Chemical Fertilizers on Growth and Yield of Vegetable Cluster bean (Cyamopsis tetragonoJoba (L). Taub) cv. Pusa Navbahar" with ten treatments in a Randomized Block Design, which are replicated three rimes. The results indicated that the growth and yield parameters were significantly affected by different biofertilizers and chemical fertilizers. The treatment T9 (25 kg N/ha + 50 kg P2O5/ha + Rhizobium + PSB inoculation) recorded significantly the highest plant height (56.48 cm), (151.85 cm) at 50 % flowering and at harvest, respectively. The treatment T9 had also recorded highest RGR i.e. 0.06 and 0.04 g/g/day) at 45 DAS and 75 DAS, respectively. Different yield parameters vi%., emergence of first flower, days to 50 % flowering per plot, green pod yield per plant, per net plot and per hectare were found to be significant with different combinations of bio fertilizers and chemical fertilizers. The treatment T9 (25 kg N/ha + 50 kg P2O5/ha Rhizobium + PSB) recorded the minimum days for emergence of first flower (30.33 days), which was found at par with treatments T3 and T6. Further this treatment had also recorded minimum days taken for 50 % flowering (38.00 days) followed by treatment T3. The significantly maximum no. of pods per cluster (11.04), maximum no. of clusters per plant (19.72) was also recorded under treatment T9 which was followed by treatments T3, T8, T6 and T2 respectively. Further maximum pod length (13.03 cm) was obtained under T9, which was followed by treatment T3. The green pod yield per plant (396.00 g) per net plot (9.05 kg) and per hectare (22.88 t) were found significantly maximum under the treatment T8 which was followed by T3, T6 and T8, respectively. The maximum net realization of Rs. 51291 per hectare was recorded with the treatment. T9 (25 kg N/ha + 50 kg P2O5/ha + Rhizobium + PSB) with highest C.B.R. (1 : 2.28) as compared to rest of the treatments. Results obtained from this investigation, it is reveled that the seeds of cluster bean should be inoculated with Rhizobium and Phosphorus Solubilizing Bacteria (PSB) along with the application of 25 kg N ha-1 and 50 kg P2O5 ha-1 for getting maximum green pod yield and net profit for vegetable purpose cluster bean under middle Gujarat agro-climatic condition.ThesisItem Open Access EFFECT OF BIOFERTILIZERS AND CHEMICAL NITROGENOUS FERTILIZER ON GROWTH AND FLOWER YIELD OF CHRYSANTHEMUM (Chrysanthemum morifolium Ramat)(AAU, Anand, 2005) CHAUHAN, PARIN ARVINDBHAI; PATEL, H. C.An experiment on "Effect of biofertilizers and chemical nitrogenous fertilizer on growth and flower yield of chrysanthemum (Chrysanthemum morofolium Ramat)" was conducted at College Nursery of B.A. College of Agriculture, Anand Agricultural University, Anand during the winter season of 2004 - 05. The treatments comprising two biofertilizers (Azospirillum and Azotobacter) and three nitrogen doses (200, 170, 150 kg N/ha) including control (recommended dose) were tried in Randomized Block Design with three replications. The results revealed that 175 kg N/ha + Azotobacter + Azospirillum (T9) produced significantly maximum plant height at first flower picking (70.93 cm), number of branches per plant (6.29) and plant spread (24.20 cm2) followed by 200 kg N/ha + Azotobacter + Azospirillum (T8). The plants under the treatment T9 (175 kg N/ha + Azotobacter + Azospirillum) required significantly minimum days for appearance of first flower bud (85.47 days), it was followed by treatment T8. Treatment T9 produced maximum number of flowers per plant (44.51) and also recorded maximum flower diameter (7.18 cm) as well as weight of individual flower (3.11 g) followed by treatment T8. Significantly the highest flower yield per plant (110.33 g) as well as per hectare (11.76 t) was recorded in treatment T9 and followed by treatment T8, (102.33 g) and (10.841) flower yield per plant and hectare, respectively. The treatment T7 (150 kg N/ha Azospirillum) produced flowers with maximum vase life (15.25 days), keeping life with pedicel (12.0 days) and keeping life without pedicel (7.72 days). The treatment T9 (175 kg N/ha Azotobacter + Azospirillum) recorded the highest net realization (75153 Rs / ha) as well as highest cost benefit ratio (1:2.77) and saved 25 percent nitrogen.ThesisItem Open Access EFFECT OF CYCOCEL AND ITS METHODS OF APPLICATION ON GROWTH, YIELD, QUALITY AND STORAGE BEHAVIOUR OF ONION (Allium cepa L.) cvs. GOW-1 AND Local White(AAU, Anand, 2004) PATEL, MAYUR SHANTILAL; Sadaria, D. T.The field investigation was carried out during rabi season of 2003-04 on sandy loam soil of Horticultural Research Farm at Anand Agricultural University, Anand to study the effect of cycocel and its methods of application on growth, yield, quality and storage behaviour of onion (Allium cepa L.) cvs. Gujarat Onion White-1 (GOW-1) and Local White. The experiment was conducted in Factorial Randomized Block Design comprised of two varieties (GOW-1 and Local White), three concentrations (500, 1,000 and 1,500 ppm) and two application methods (root dipping and foliar spray at 45 DAT) of cycocel. There were two controls without any treatment. Thus, there were fourteen treatments with two checks. The root dipping treatment of seedlings was given at the time of transplanting while, the foliar spraying was given at 45 days after transplanting. The performance of the both varieties was same for all the characters under study except plant height at 30 DAT and dry matter content of onion bulb. The variety Local White had given significantly high plant height at 30 DAT and also it was superior for dry matter content of bulb over GOW-1. The different concentrations of cycocel were failed to induce desired significant effect on parameters viz. plant height, length of leaf, bolting, twin bulb, diameter of bulb, bulb volume and total soluble solids content. The effect of cycocel concentrations were significant in expected direction for number of leaves per plant, weight of ten bulbs, yield and dry matter content of onion bulb. The results indicated that onion crop has attained foil vegetative growth within 90 DAT and later on all vegetative parameters had been declined. The maximum number of leaves per plant (9.40) were recorded with the highest concentration of cycocel (1,500 ppm) at 90 DAT. Similarly, the highest ten bulbs weight (1729.17 g), yield (357.79 q/ha) and dry matter content (15.93 %) were also recorded with 1,500 ppm cycocel concentration. Thus, 1,500 ppm concentration of cycocel was the best for increasing weight and yield of onion bulb. The root dipping method of seedlings before transplanting was significantly effective for reducing plant height (40.38 to 38.88 cm), leaf length (37.28 to 35.93 cm) and increasing number of leaves per plant (4.96 to 5.72 cm) up to 30 DAT. The foliar spraying of cycocel after 45 days from transplanting was significantly effective in desired direction for all the parameters studied. This method had decreased plant height (78.82 to 77.44 cm), leaf length (66.12 to 64.28 cm) and increased number of leaves per plant (8.71 to 9.74 cm) at 90 DAT. Similarly it had effectively decreased bolting (3.67 to 3.16 %), twin bulb (3.28 to 2.11 %). The foliar spraying of cycocel had increased ten bulbs weight (1645.0 to 1757.5 g), equatorial bulb diameter (6.65 to 7.56 cm), polar diameter (6.60 to 7.45 %), volume of bulb (191.72 to 204.36 cm ), neck thickness (1.06 to 1.26 cm), yield (332.47 to 367.81 q/ha), total soluble solids in bulb (13.02 to 13.23 %) and dry matter content of bulb (14.22 to 16.76 %) than the root dipping method. In brief, foliar spraying of cycocel was more effective than the root dipping method of cycocel for yield and its attributes. The overall effect of combined treatment (concentrations and methods of application) against the control were significant for all the vegetative, yield and quality parameters except total loss during storage. The combined treatment had decreased plant height (79.43 to 78.13 cm), leaf length (66.40 to 65.20 cm), bolting (3.93 to 3.41 %), and twin bulb (3.67 to 2.69 %). However, combined treatment had increased leaves per plant (8.17 to 9.23), weight of ten bulbs (1579.17 to 1701.25 g), equatorial diameter (6.29 to 7.11 cm), polar diameter (6.00 to 7.03 cm), volume of bulb (187.75 to 198.04 cm^), neck thickness (0.96 to 1.16 cm), yield (324.89 to 350.14 q/ha), total soluble solids (12.95 to 13.12 %) and dry matter content of bulb (12.70 to 15.49 %). Based on monetary return and CBR cycocel @ 1500 ppm concentration applied as foliar spraying was found the best for both varieties.ThesisItem Open Access EFFECT OF PLANTING DATES AND IBA LEVELS ON ROOTING OF STEM CUTTINGS OF DRUMSTICK (Moringa oleifera Lamk.) cv. 'PKM-1'(AAU, Anand, 2004) SHUKLA, PRIYAKANT NARHARIPRASAD; Sadaria, D. T.The object; of present experiment was to study the effect of planting dates and IBA levels on rooting of stem cuttings of drumstick cv. 'PKM-1'. The experiment was conducted at Horticultural Research Farm (Fruit Nursery), Department of Horticulture, B. A. College of Agriculture, Anand Agricultural University, Anand during the year 2003. The experiment was taken in permanent nursery bed. The rooting media was prepared with the mixture of 2 parts of soil, 1 part of sand and 1 part of compost. The experiment was laid out in Complete Randomized Design with three replications. The treatment were comprised of three planting dates (15th April, 15th May,and 15th June) and five levels of IBA (0, 1,000, 2,000, 3,000 and 4,000 mg/litre IBA) making total 15 treatment combinations. All the characters under study showed significant variation due to different planting dates. The planting date D2 (15th May) recorded highest number of sprouted cuttings (1.85) at 45 DAP while the planting date D3 (15th June) recorded maximum number of sprouted cutting (2.48) at 30 DAP followed by planting date D2 (2.12). The planting date D2 (15th May) recorded maximum number of sprouts per cutting at 30 and 45 DAP (2.01 and 2.21). The planting date D2 (15th May) recorded highest shoot length (28.19 cm), maximum number of leaflets (128.70), highest number of primary roots (9.04), maximum number of secondary roots (11.85), highest length of primary roots (7.71 cm), maximum sprouting percentage (5.00), highest survival percentage (4.14) and maximum dry matter production (5.56 g). The characters under study of IBA levels, treatment showed significant variation due to different levels of IBA, except in number of sprouted cutting at 30 DAP. Maximum number of sprouted cuttings (1.97) recorded by the treatment T3 (2,000 mg/litre IBA) at 45 DAP. The highest number of sprouts per cutting (2.00) was recorded by treatment T4 (3,000 mg/litre IBA) at 30 DAP which was at par with treatment T3 (2,000 mg/litre IBA). In case of 45 DAP, the treatment T3 (2,000 mg/litre IBA) recorded maximum number of sprouts per cutting (2.14). The highest shoot length (26.83 cm) was recorded by the treatment T2 (1,000 mg/litre IBA) followed by treatment T3 (2,000 mg/litre IBA) i.e. 24.96 cm. Similarly, the treatment T3 (2,000 mg/litre IBA) recorded maximum number of leaflets per cutting (123.91), highest number of primary roots per cutting (8.25), maximum number of secondary roots per cutting (11.25), highest length of primary roots (5.74 cm) per cutting, maximum sprouting percentage (5.45), highest survival percentage (4.60) and maximum dry matter production (5.55 g). The interaction effect of different planting dates and IBA levels (DxT) were found significant for number of sprouts per cutting at 45 DAP, number of leaflets, number of primary roots, number of secondary roots, length of primary roots and dry matter production. Maximum number of sprouts per cutting was found in treatment combination D1T3(2.48) at 45 DAP, which was at par with D2T5 (2.43), D2T4 (2.33), D2T2 (2.20), D2T3 (2.16) and DJ4 (2.13). The treatment combination D2T3 recorded highest number of leaflets (230.33), maximum number of primary roots (12.25), highest length of primary roots (10.58 cm) and maximum dry matter production (6.04 g). The highest number of secondary roots per cutting was recorded by treatment combination D2T2 (14.16) followed by D2T5 (13.95), D2T3 (13.85) and D2T4 (12.33), respectively. For other characters like number of sprouted cuttings at 30 and 45 DAP, shoot length, sprouting and survival percentage found non-significant. Thus, from the results it can be concluded that planting date D2 (15th May) gave significantly best result in all rooting parameters except for number of sprouted cutting at 30 DAP. The different levels of IBA treatment, treatment T3 (2,000 mg/litre IBA) gave best result in all rooting parameters. The interaction effect between planting dates and different levels of IBA, treatment combination D2T3 gave best result. The present study indicated that the stem cuttings of drumstick cv. 'PKM-1' treated with IBA @ 2,000 mg/litre and planted on 15th May is the most effective combination for inducing maximum rooting and survival percentage.