Skip navigation
Beta Version
SandeepSingh.pdf.jpg
Thesis
2013-07
G.B. Pant University of Agriculture and Technology, Pantnagar - 263145 (Uttarakhand)
1
19
0
0
JayesthKumarSharma.pdf.jpg
Thesis
2006-06
G.B. Pant University of Agriculture and Technology, Pantnagar - 263145 (Uttarakhand)

The application of composites as engineering materials has become state of art. Fatigue is one of the most complicated problems for fiber composites. Fatigue tests are expensive and time consuming. In all testing it is need to define a failure criterion in use. This is particularly difficult for fiber reinforced plastics. A potential solution to this problem is of...

1
24
0
0
HarshitKumarSaxena.pdf.jpg
Thesis
2019-09
G.B. Pant University of Agriculture and Technology, Pantnagar - 263145 (Uttarakhand)
1
48
0
0
Th-6164.pdf.jpg
Thesis
2001-08-13
UNIVERSITY OF AGRICULTURAL SCIENCES GKVK BANGALORE

A study was conducted to evaluate the subsurface pipe drainage system that has been installed during 1991-'96 at Islampur village, Gulbarga district in Upper Krishna Project Command area by the University of Agricultural Sciences, Dharwad with the funding by the UK? CADA (Command Area Development Authority). The subsurface drains were executed in 26 ha of blac...

1
16
0
0
BikrajUpreti.pdf.jpg
Thesis
2017-07
G.B. Pant University of Agriculture and Technology, Pantnagar - 263145 (Uttarakhand)

Bio-composites are putting forth a concentrated effort in almost every engineering field due to their cost viability and biodegradable nature. In a huge variety of natural fibers, bhimal fiber is a very promising fiber that still needs to be explored as an engineering material, because it has very rarely been used by researchers in their research work. Bhimal fiber...

1
33
0
0
RahulKshetri.pdf.jpg
Thesis
2018-01
G.B. Pant University of Agriculture and Technology, Pantnagar - 263145 (Uttarakhand)

The current work presents findings from the experimental investigation of the effect of cutting speed, feed rate and depth of cut on the feed force, cutting force and surface roughness, tool wear during turning of Aluminium alloy 7068, by using TiN coated carbide tool in dry condition. There are several dependent and independent parameters involved during orthogona...

1
48
0
0
SushilKumarChoudhary.pdf.jpg
Thesis
2018-01
G.B. Pant University of Agriculture and Technology, Pantnagar - 263145 (Uttarakhand)

In last few years, Inconel 600 superalloy gained much attention of researchers due to its properties viz. high impact strength at room temperature, high hardness, high melting point, high electrically conductivity, corrosion resistance etc. Due to such excellent properties, Inconel 600 superalloy is an ideal choice for the numerous industrial applications, such as ...

1
59
0
0
AmitKumar.PDF.jpg
Thesis
2013-07
G.B. Pant University of Agriculture and Technology, Pantnagar - 263145 (Uttarakhand)

Welding is a process by which we can join two similar or dissimilar metals very efficiently. With the help of welding, success of the weld can be achieved up to 100%. Welding is more useful because it is less costly as compared to other fabrication process like casting, forming, machining. In this study dissimilar metals of stainless steel of grade 304 and stainl...

1
46
0
0
Thesis
2021-07
G.B. Pant University of Agriculture and Technology, Pantnagar - 263145 (Uttarakhand)

Submerged Arc Welding is a method of fusion welding in which heat is produced by an arc between the work piece and a continuously fed filler metal electrode. A dense blanket of molten flux and slag formed from the granular fluxing material pre-placed on the work protects the molten weld pool from the surrounding atmosphere. Due to heat generation there are thermal ...

1
0
0
0
Thesis
2021-03
G.B. Pant University of Agriculture and Technology, Pantnagar - 263145 (Uttarakhand)

Submerged arc welding process is an arc welding process in which arc generates under the blanket of granular flux by which molten metal is isolated from the surrounding so that it is not react with the surrounding as result of that the quality of weld bead improve. In this welding, high heat generates during the process by which the rate of melting of electrode in...

1
0
0
0
RachnaPandey.pdf.jpg
Thesis
2019-05
G.B. Pant University of Agriculture and Technology, Pantnagar - 263145 (Uttarakhand)

Effect of process parameters on friction stir welding (FSW) process characteristics and mechanical properties of weld joints have been studied. Design of experiment (DOE) approach was applied for understanding the effects of selected FSW process parameters. An L9 orthogonal array was used to investigate the effect of welding speed, rotational speed and tilt angle. ...

1
42
0
0
Thesis
2021-03
G.B. Pant University of Agriculture and Technology, Pantnagar - 263145 (Uttarakhand)

Submerged Arc Welding (SAW) is an important welding used in industries. It is used in evaporator casing, heat exchanger, and pipeline industries as the quality of weld bead obtained from SAW is high but due to high heat generation, the process consists of thermal cycles, which induces residual stress and degrades the quality of the weld joint. A lot of work on vari...

1
0
0
0